SBC 440ci 775 Hp Bracket Engine

SBC 440ci 775 Hp Bracket Engine


9.000″ Deck | 4.185″ Bore | 4.000″ Stroke | 6.000″ Rod | 775Hp @ 7200 rpm


  • World 50mm Raised .125″ Cam 4 Axis CNC Race Prepped Block
  • Brass or Stainless Steel Lifetime Freeze Plugs
  • K1 or Manley 4340 Internally Balanced Steel Crank
  • K1 Steel Billet or Manley H-Beam Steel Rods  and ARP 2000 Bolts
  • King Race Series Main and Rod Bearings
  • JE Wiseco “Lil” Quick 16 Gas Ported Coated Skit 15:1 Pistons
  • JE Wiseco Tool Steel Wrist Pins
  • .043 Ring Package w/Low Tension Oil Rings
  • Comp Cams 7/4 Swap .750″ Steel Billet Roller Cam
  • PBM .125″ Raised Cam Billet Timing Set with Torrington Bearing
  • Aluminum Timing Cover
  • AwesomeEngines® Billet TDC Pointer TDC Verified and Set
  • Comp Cams “HIPPO” NBO Bushed Roller Lifters
  • ATI Super Damper Internally Balanced
  • Brodix 245cc NPP Fully CNC Ported Heads
  • 2.125/1.600 Stainless Steel Valves
  • PAC RACING 1550″ Roller Springs
  • Titanium Retainers and 10° Locks
  • Fel Pro #1144 MLS Severe Duty Racing Head Gaskets
  • Manley 3/8 x .135″ Wall Chrome Moly Severe Duty Push Rods
  • Jesel or T&D Shaft Rocker System
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • Moroso Oil Pump Kit with Tig Welded Pickup
  • Moroso Oil Pan with Kickout, Windage Tray and Dip Stick Kit
  • Brodix 100% CNC Match Ported Intake Manifold and Jomar Spacer
  • Holley or QFT 1050cfm Carb Dyno Tested and Tuned (add $995)
  • MSD Billet 84697 Distributor, 10.5mm Wires, NGK Spark Plugs (add $595)
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Dart Iron Eagle Steel Billet Cap Raised .390 Cam Race Series 100% 4 AXIS CNC Blue-Printed Race Prepped Block
+ $475.00
Callies Magnum Series Internally Balanced Crankshaft
+ $1275.00
Crower #E95128X4 Enduro Crankshaft
+ $1495.00
Oliver Steel I Beam Rods Best in the Business (Callies Ultra Series I Beam Rods $995)
+ $ 975.00
Callies Ultra Series I Beam Rods with L19 Rod Bolts
+ $1175.00
Isky Red Zone “NBO” Needle-less Bearing Option and “HIPPO” Hi Pressure Pin Oiling
+ $ 595.00
Total Seal Stainless Steel, TNT or Hell Fire Rings
+ $ 175.00
Copper SCE Head Gaskets Installed w/Oring in the Block and Receiver Groove Installed in the Heads for Maximum Seal w/Power Adders
+ $ 275.00
Jesel Belt Drive System Installed
+ $1175.00
Crank Trigger Set Up Installed and Dyno Tested
+ $ 175.00
MOROSO Complete New Vacuum Pump System Installed and Dyno Tested with Brackets, Pulleys, Pump Mounted Relief Valve, Mandrel, Belt, Hoses and Ends
+ $1075.00
ATI Aluminum Shell Very Light Weight Super Damper Installed
+ $ 125.00
Edelbrock Super Victor CNC Match Ported Intake Manifold
+ $125.00

Dyno Tested and Tuned with 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Some Components May Be Subject To Change of Equal Value Due To Availability. Free Freight Applies To This Advertised Item Shipped To A Commercial Address Or The UPS Terminal Closest To Your Zip Code For Pickup In The 48 States. Residential, Out-Of-Area, Lift Gate Service Subject To Additional Charges. Insurance and Handling Fees Apply If Requested.

Comments are closed.