SBC 440ci 800 Hp Bracket Race Engine

SBC 440ci 800 Hp Bracket Race Engine

$16,875.00

9.000″ Deck | 4.185″ Bore | 4.000″ Stroke | 800Hp @ 7200 rpm

Components

  • Dart SHP Splayed Main Cap Race Block
  • Stainless Steel or Brass Freeze Plug Kit
  • ARP 12 Point Head Stud Kit Plate Honed with Block
  • K1 4340 Internally Balanced Steel Crank
  • K1 Steel Billet 4340 H-Beam Rods with ARP 2000 Rod Bolts
  • King Race Series Main and Rod Bearings
  • Wiseco Lil Quick 16 Gas Ported Coated 15:1 Pistons, Tool Steel Pins
  • Total Seal 043 043 3.0 mm Low Tension Ring Set
  • Comp Cams 7/4 Swap .750″ Roller Cam
  • Torrington Bearing Double Roller Timing Set
  • Polished Aluminum Timing Cover with Billet TDC
  • Comp Cams HIPPO Solid Roller Lifters
  • ATI SFI Internally Balanced Damper
  • 1181000 Brodix 18° 100% CNC Machined Aluminum Heads
  • Brodix 2.140/1.600″ Intake and Exhaust SS Valves
  • PAC 1.550 Roller Springs and Titanium Retainers
  • Fel Pro #1144 MLS Severe Duty Racing Head Gaskets
  • Manley 3/8″ x .135″ Wall Chrome Moly Severe Duty Push Rods
  • Comp Cams Pro Magnum Roller Rockers 1.6/1.6 and Stud Girdle
  • AwesomeEngines® CNC Logo Powder Coated Valve Covers
  • Moroso Oil Pump Complete Package Kit
  • Moroso Kick Out Oil Pan with Windage Tray
  • Brodix 18° HV 1800 CNC Match Ported Intake Manifold
  • Holley or Quick Fuel 1050cfm Race Carburetor
  • MSD Billet Distributor, 8.5mm Wires, NGK Race Series Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Dart Iron Eagle Raised Cam Steel Billet Main Cap Race Series Fully CNC Machined Blue Printed Race Prepped Block
+ $ 675.00
Callies Magnum Internally Balanced Crankshaft
+ $ 1275.00
Crower #E95128X4 Enduro Crankshaft; Excellent for Power Adder or Nitrous Engines
+ $ 1475.00
Oliver Steel I Beam Rods with L19 Rod Bolts
+ $ 995.00
Callies Ultra I Beam Steel Rods with L19 Rod Bolts
+ $1175.00
.170″ Wall Tool Steel Wrist Pins
+ $ 150.00
Comp Cams NBO Bushed HIPPO Roller Lifters
+ $ 675.00
Isky RED ZONE Bushed HIPPO Roller Lifters
+ $ 875.00
Total Seal Stainless Steel, TNT or Hell Fire Rings
+ $ 175.00
Jesel or T&D Shaft Rocker System 1.6/1.6
+ $1275.00
Copper SCE Head Gaskets Installed with Oring in the Block and Receiver Groove Installed in the Heads
+ $ 295.00
Jesel Belt Drive System Installed
+ $ 895.00
MSD Crank Trigger Set Up Installed and Dyno Tested
+ $ 295.00
Moroso Complete Vacuum Pump System Dyno Tested with the Engine
+ $ 995.00
ATI Aluminum Shell Very Light Weight Super Damper Installed
+ $ 195.00
Jomar Heat Sync Spacer
+ $ 75.00
Ultra SFI 168 Tooth Flex-Plate Internally Balanced in House and ARP Bolts
+ $ 125.00
Power Master High Torque Gear Reduction Made in the USA Heavy Duty Starter
+ $ 245.00

Dyno T&T using 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Comments are closed.