SBC 454ci 785 Hp Bracket Race Engine

SBC 454ci 785Hp Bracket Race Engine

$15,975.00

4.185″ Bore | 4.125″ Stroke | 6.000″ Rods | 785HP @ 7000 rpm

Components

  • Dart Iron Eagle Raised Cam Fully CNC Race Prepped Block
  • Brass or Stainless Steel Lifetime Freeze Plugs
  • ARP 12 Point Head Stud Kit Plate Honed with and for the Heads
  • Eagle 4340 Internally Balanced Crankshaft
  • K1 Steel Billet 4340 or Manley H-Beam Rods with ARP 2000 Bolts
  • King Race Series Main and Rod Bearings
  • JE Wiseco “Lil” Quick 16 15:1 Forged 2618 Pistons
  • Total Seal .043″ Plasma Moly Low Tension Rings
  • Comp Cams BBC .750″ Lift 7/4 Steel Billet 1.968″ Cam
  • Cloyes Raised Cam Billet Timing Set with Torrington Bearing
  • Comp Cams “HIPPO” (hi-pressure pin oiling) Roller Lifters
  • Aluminum Timing Cover and Billet TDC Pointer
  • ATI Super Damper (best in the business)
  • AFR 245cc NPP Fully CNC Ported Heads
  • 2.125/1.600″ Intake and Exhaust SS Valves
  • Cometic MLS Head Gaskets
  • PAC RACING Solid Roller Springs and Titanium Retainers
  • Manley Chrome 3/8 x .135″ Wall Moly Severe Duty Push Rods
  • Jesel or T&D Shaft Rocker System
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • Moroso Oil Pump with Tig Welded Pickup Kit
  • Moroso Oil Pan with Kick out, Windage Tray and Dip Stick Kit
  • AFR CNC Ported Intake Manifold and Special  Jomar Spacer
  • MSD Billet 8469-7 Distributor, 8.5mm Wires, NGK Spark Plugs (add $395)
  • Holley or QFT FX 1050cfm Carb Dyno T&T (add $995)
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Callies Magnum or Crower #E95129X4 Enduro Crankshaft; Excellent for Power Adder or Nitrous Engines
+ $1475.00
Oliver Steel I Beam Rods with L19 Rod Bolts
+ $975.00
Callies Ultra I Beam Rods with L19 Rod Bolts
+ $1175.00
.170″ Wall Tool Steel Wrist Pins
+ $ 175.00
Comp Cams NBO Bushed Severe Duty Roller Lifters
+ $ 675.00
Isky Red Zone Bushed Needless Roller Lifters
+ $ 775.00
Total Seal Stainless Steel, TNT or Hell Fire Rings
+ $ 175.00
Tool Steel Top Rings
+ $ 275.00
Jesel Belt Drive System Installed
+ $1175.00
Crank Trigger Set Up Installed and Dyno Tested
+ $ 175.00
Moroso Complete New Vacuum Pump System Installed
+ $1175.00
ATI Aluminum Shell Very Light Weight Super Damper Installed
+ $ 175.00
Edelbrock Super Victor Intake Manifold
+ $ 125.00
Jomar Specially Designed for More Air Flow and Keeping Heat from the Fuel
+ $ 75.00
Ultra SFI 168 Tooth Flex-Plate Internally Balanced in House with ARP Bolts
+ $ 125.00
Power Master High Torque Gear Reduction Made in the USA New Design Heavy Duty Starter
+ $ 245.00
NX Gemi Nitrous Plate System with 100-500Hp
+ $ 795.00

Dyno Tested and Tuned Using 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Comments are closed.