SBC 484ci 750 Hp Mad Dawg Crate Engine

SBC 484ci 750 Hp MAD DAWG Crate Engine

The Mad Dawg Crate engine is almost the same as our Pro Magnum line. Built with top of the line internals, 11:1 compression versus 14:1, Pro Street cam which makes this engine possible. We have made this Monster Mouse the best 93 octane naturally aspirated pump gas engine available. Designed and each one dyno tested for street driving and maximum performance as the goal


9.325″ Deck | 4.195″ Bore | 4.375″ Stroke | 6.125″ Rods | 650lb@ 4800 / 750Hp @ 6800 rpm

See Actual Video with Dyno Pull See Actual 454ci Pro Street Ready to Ship

Actual Components Included w/Purchase

  • DART IRON EAGLE 9.325″ Steel Billet Cap 100% CNC Machined Block
  • CALLIES Magnum” Internally Balanced 4340 Steel Crank
  • K1 Steel Billet or Manley 6.125″ H-Beam 4340 Rods, ARP 2000 Rod Bolts
  • JE or WISECO 11:1 Forged 2618 Pistons
  • TOTAL SEAL Plasma Moly File To Fit Ring Set
  • CLEVITE or KING Race Series Main and Rod Bearings
  • POLISHED Aluminum Timing Cover, TDC Billet Pointer
  • MOROSO Oil Pump Kit
  • MOROSO 20193 IRON EAGLE WIDE Stroker 7qt. Oil Pan
  • PRW Internally Balanced New Street Damper
  • MSD Pro Billet Distributor, Wires, NGK Plugs
  • DART Block Kit with Coated BBC Cam Bearings and Brass Freeze Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)
  • BRODIX STS T1 233 100% CNC Ported Aluminum Heads 326/233af
  • BRODIX 2.125-1.600″ Stainless Steel Valves
  • PAC RACING .700″ Lift Springs and Titanium Retainers
  • COMETIC or FEL PRO MLS Head Gaskets
  • ARP Head Stud Kit Plate Honed to Your Block
  • COMPETITION CAMS 7/4 Swap Steel Billet Roller Camshaft
  • COMPETITION CAMS “HIPPO” Solid Roller Lifters
  • CLOYES Billet Roller Timing Set with Torrington Bearing
  • MANLEY .120″ Wall Chrome Moly Push Rods
  • COMPETITION CAMS ULTRA Pro Magnum Series Roller Rockers
  • BRODIX CNC Match Ported Single Plane Intake
  • HOLLEY or QFT 1050 cfm Dyno Tuned Carburetor
  • AwesomeEngines® CNC Engraved Aluminum Valve Covers

Available Upgrades

ATI Made in the U.S.A. Super Damper Installed for the Best Protection Available Specific Honed to the Crank Snout
+ $ 295.00
COMPETITION CAMS or ERSON Hydraulic Roller Cam Kit with Cast Gear (cam, lifters, springs, retainers)
+ No Charge
JOMAR Pro Series Stud Girdle
+ $ 175.00
JESEL or T&D Shaft Rocker System
+ $ 795..00
JESEL or T&D  Pro Series Shaft Rocker System with Roller Tip Bearing
+ $1075.00
JESEL Raised Cam Billet Belt Drive System Installed
+ $ 1275.00
+ $ 575.00
+ $ 975.00
Trend Taper Wall 7/16 Chrome Moly Push Rods with Shaft Rockers Only (requires a lot of clearance work)
+ $ 275.00
MOROSO 22164 Billet Aluminum Oil Pump Kit
+ $ 275.00
AFR 245cc Cylinder Heads with JESEL .450″ Offset Rockers and 7/16 Trend Push Rods Push This Engine to Almost 800HP
+ $1575.00
Complete EFI up to 1200 Hp Fast Fuel Injection System Installed, Dyno Tested and Tuned
+ $1995.00
BRODIX, DART or MERLIN Aluminum Block and Special Head Stud Kit
+ $3995.00
CALLIES Ultra I Beam Rods with L19 Rod Bolts
+ $1075.00
Awesome Engines CNC Engraved Logo Your Color Powder Coated Covers w/ Billet Oil Fill
+ $ 200.00

Dyno Tested and Tuned Using 93° Pump Gas • Vacuum Pump • HP Corrected To Sea Level

Some Components May Be Subject To Change of Equal Value Due To Availability. Free Freight Applies To All Advertised Items Shipped To A Commercial Address Or The UPS Terminal Closest To Your Zip Code For Pickup In The 48 States. Residential, Out-Of-Area, Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Apply If Requested.

Comments are closed.