SBC 499ci 950 Hp Magnum Race Engine

SBC 499ci 950 Hp Magnum Race Engine

This 499ci SBC has the very best internals as well as the Dart block and Brodix Heads to match a perfectly selected proven power making engine assembled

$28,995.00

9.500″ Deck | 4.200″ Bore | 4.500″ Stroke | 6.250 Rods | 950 HP @ 7400 rpm

Components

  • Brodix or Dart 4.5 Bore Space 100% CNC Aluminum Raised Cam Block
  • ARP Specific Aluminum Head Stud Kit Plate Honed with Block
  • Callies Steel Billet 4340 NO Drill Internally Balanced Crank
  • Oliver I-Beam Steel Rods and L19 Rod Bolts
  • Clevite or King “HP” Series Main and Rod Bearings
  • JE or Wiseco 15:1 2618 Forged Pistons
  • JE Tool Steel .180″ Thick Wall Wrist Pins
  • Total Seal Stainless Steel 043-043-3.0 mm Low Tension Rings
  • Competition Cams .850″ Lift Steel Billet 7/4 Swap Roller Cam
  • Jesel Raised Cam Belt Drive System
  • Competition Cams Bushed .904″ HIPPO Roller Lifters
  • ATI Super Damper Specific Honed to Crank (best in the business)
  • AwesomeEngines® Billet TDC Pointer TDC Verified

  • Brodix WP FF 13° Fully CNC Ported Heads flow 389/265@.800
  • Brodix 2.200″ Intake w/1.600″ Exhaust Stainless Steel Valves
  • Manley 221456 Lightweight Springs and T-Retainers
  • Cometic or Fel Pro MLS Head Gaskets
  • Trend 7/16 x .165″ Taper-wall Push Rods
  • Jesel or T&D Pro Series Shaft Rocker System
  • AwesomeEngines® CNC Engraved V-Covers
  • Moroso External Billet Oil Pump
  • Moroso Aluminum Pro Eliminator Oil Pan
  • Edelbrock 28458 Ported Intake Manifold w/Blended Moroso Spacer
  • Holley or QFT 1050 cfm Carburetor and Jomar CNC Ported Spacer
  • MSD Distributor, Crank Trigger, 8.5 mm Wires, NGK Plugs
  • AwesomeEngines® Free 48 State Freight

Upgrades

WPBD4510 Symmetrical Port 12° 402/263cfm @ .800 cfm
+ $ 975.00
Callies XL 48lb. Magnum Series 4340 NO Drill Internally Balanced Crank and Heavy Metal Included 10+hp
+ $ 975.00
Trend Products Tool Steel .220″ Thick Wall Wrist Pins that Require Heavy Metal and Included in Price
+ $ 375.00
Moroso Vacuum Pump System, Pump Mounted Relief Valve and Billet Light Weight Mandrel (dyno tested)
+ $1075.00
CFE Sheet Metal Intake
+ $1975.00
CFE Sheet Metal Intake and 2×4 Carbs, Linkage Plumbed with Regulators and Lines Dyno Tested
+ $2975.00
Nitrous Express Shark 200-600Hp System Installed
+ $1775.00
Rons Toilet Bowl Fuel Injection Installed and Dyno Tuned
+ $1975.00
Rons Terminator Fuel Injection Installed and Dyno Tuned
+ $2275.00

Dyno Tested & Tuned with 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.