383ci 540Hp SBC Pro Street Race Engine Special

383ci 540Hp SBC Pro Street Race Engine Special

$7975.00

9.000 Deck | 4.030 Bore | 6.000 Rod | 3.750″ Stroke | 550Hp @ 7000 rpm

SBC Pro Street Race Engine Special is Sitting on the Showroom Floor Ready to Ship Complete as Listed. GM 4 Bolt Main Block 100% CNC Bored to 4.027″, CNC Square Decked to 9.000″, Radial Cleared for a 3.750″ Stroke, Final Plate Honed to 4.030″, Cam Bearings, Brass Plug Kit, Scat 4340 Steel Internally Balanced Rotator with Crank, H-Beam Steel Rods, Forged Pistons, File to Fit Race Rings Gapped for some NOS use, Dyno Tested and Tuned Pump Gas Pro Street Race Engine Special

 

Components

  • GM Four Bolt Main 100% CNC Race Prepped Block
  • New ARP Head and Main Stud Kit Plate Honed with Block
  • New Cam Bearings and all Block Plugs
  • New Scat 4340 Internally Balanced Steel Crank
  • New Scat H-Beam 4340 5.700 Bushed Rods 7/16 ARP Bolt
  • New King Racing H Main and Rod Bearings
  • New Flat Top 11:1 Compression Forged Pistons
  • New JE Plasma Moly 1/16 1/13/16″ File to Fit Ring Set
  • Competition Cams Solid Roller Cam
  • Competition Cams Solid Roller Hippo Lifters
  • Roll Master Billet Double Roller Timing Set
  • Chrome Timing Cover and TDC Pointer New
  • ATI SFI 6¼” Steel Internally Balanced Damper
  • Fresh AFR 195cc 64cc Fully CNC Ported Race Prepped Heads
  • Fresh AFR 2.020, 1.600″ Stainless Steel Valves
  • Competition Cams Spring and 10° Retainer Kit New
  • New Fel Pro MLS Severe Duty Head Gaskets
  • New Manley .120″ Wall Chrome Moly Push Rods
  • Competition Cams Pro Magnum 1.5 Roller Rockers and Girdle
  • AwesomeEngines® CNC Engraved Aluminum Valve Covers
  • New Moroso 22124 Oil Pump with Tig Welded Pick Up Kit
  • New Moroso #20191 Stroker 7qt. Oil Pan
  • Edelbrock Match Ported Victor Jr 4150 Intake Plumbed for Fogger
  • Fresh Holley 750 CFM Carburetor Dyno Tested and Tuned
  • New MSD Distributor, 8.5 mm Wires Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

Moroso Vacuum Pump System, Pump Mounted Relief Valve and Billet Can Complete
+ $1250.00
Powermaster Starter, In House Internally Balanced to .3 Ounce Inch SFI TCI Flexplate, ARP Bolt Kit
+ $  375.00

Dyno Tested and Tuned with 93° Pump Gas • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or the Nearest Terminal for your Zip Code For Pickup in the 48 States

Comments are closed.

Skip to toolbar