383ci 550 Hp SBC Drag Race Engine Special

383ci 550 Hp SBC Drag Race Engine Special


9.000″ Deck | 4.030″ Bore | 3.750″ Stroke | 550Hp @ 7000 rpm

GM 4 Bolt Main Block 100% CNC Bored to 4.027″, CNC Square Decked to 9.000″, Radial Cleared for a 3.750″ Stroke, Final Plate Honed to 4.030″, Cam Bearings and Brass Plug Kit, Scat 4340 Steel Internally Balanced Rotator with Crank, H-Beam Steel Rods, Forged Pistons, File to Fit Race Rings, Completely Assembled, Dyno Tested and Tuned Race Engine


  • GM Four Bolt Main 100% CNC Race Prepped Block
  • Head and ARP Main Stud Kit Plate Honed with Block
  • All Block Plugs and Freeze Plugs Removed and Installed After Hot Wash
  • Scat 4340 Internally Balanced Steel Crank
  • Scat H-Beam 4340 5.700 Bushed Rods 7/16 ARP Bolts
  • King Racing H Main and Rod Bearings
  • JE 12.5:1 Compression Forged Pistons
  • JE Plasma Moly 1/8 1/8 3/16″ File to Fit Ring Set and NOS End Gap
  • Competition Cams Solid Flat Tappet Competition .585/.588 Cam
  • Competition Cams or Erson EDM Oil Hole Flat Tappet Solid Lifters
  • Roll Master Billet Double Roller Timing Set
  • New Chrome Timing Cover and TDC Pointer
  • SFI 6¼” Steel Internally Balanced Damper
  • Pro Bracket 195cc 64cc Aluminum Fully Race Prepped Heads
  • Manley 2.020, 1.600″ Stainless Steel Valves
  • Competition Cams Spring and 10° Retainer Kit
  • Fel Pro Pre-Flattened Copper Wire Head Gaskets
  • Manley .120″ Wall Chrome Moly Push Rods
  • Competition Cams 1.5 Roller Rockers
  • AwesomeEngines® CNC Engraved Aluminum Valve Covers
  • Moroso 22124 Oil Pump with Tig Welded Pick Up and Stud Kit
  • Moroso #20191 Stroker 7qt. Oil Pan
  • Edelbrock Match Ported Victor Jr 4150 Intake Manifold (used)
  • Holley 750 CFM Carburetor Dyno Tested and Tuned (used)
  • MSD Distributor, Crank Trigger, 8.5 mm Wires Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight


Solid Roller Steel Billet Camshaft, Hippo Solid Roller Lifters, Spring and Retainer Package for Solid Roller Cam Kit
+ $ 875.00
NOS Kit, Tool Steel Pins, Hell Fire Rings, NX 100-300 Hp Plate Kit Installed with Hard Block Option to Strengthen Cylinder Walls,
+ $ 895.00
Moroso Vacuum Pump System, Pump Mounted Relief Valve and Billet Can Completely Installed and Dyno Tested and Tuned with Engine
+ $1075.00
Powermaster Starter, In House Internally Balanced to .3 Ounce Inch SFI TCI Flexplate, ARP Bolt Kit
+ $ 375.00
#5000-2000 Hp PowerGlide One of the Most Used in the Industry Combined with all Other and a 60 Day Satisfaction Return Policy from Manufacturer
+ $3995.00

Dyno Tested and Tuned • Moroso Air Pump • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or the Nearest Terminal for your Zip Code For Pickup in the 48 States

Comments are closed.

Skip to toolbar