406ci 600Hp SBC Drag Race Engine Special

406ci 600 Hp SBC Drag Race Engine Special

406ci 600 Hp Drag Race Engine Special with new and fresh listed items, dyno tested and tuned. We will upgrade the block before assembly for the total price of $7950.00 with either the Brodix, Dart or Pro Comp splayed cap race block 100% CNC Race Prepped to perfection.


9.000″ Deck | 4.155″ Bore | 3.75″ Stroke | 6.000″ Rods | 600 Hp @ 7000 rpm

  • New Scat 4340 Internally Balanced Crank Shaft
  • New Scat 4340 H Beam Steel Rod with 7/16 ARP Bolts
  • New Wiseco 12.5:1 Compression Forged Pistons and Pins
  • New Plasma Moly File to Fit 1/16-1/16-3-1/6 Rings
  • New King Cam, Main, and Rod Race H Series Bearings
  • New Rollmaster Timing Set with Torrington Bearing
  • New Fel Pro Pre-Rolled Head Hp and Engine Gaskets
  • New Chrome Moly .080″ Wall Push Rods (.120 wall $50)
  • New Head Stud Kit Plate Honed with the Block
  • New SFI Damper and Billet TDC Pointer
  • New NGK Racing Spark Plugs, Oil and Filter
  • Fresh GM 4-Bolt Plate Honed Full CNC Race Prepped Block
  • 7 Qt. Oil pan, Melling Pump, Pick-up, Oil Pump Stud and Shaft Kit
  • Fresh Dart PRO1-215cc Aluminum Cylinder Heads
  • PAC PSI or Nextek Springs, Titanium Retainers 250lbs Seat 600lbs Open
  • Comp Cams Steel Billet Roller Cam
  • Comp Cams Solid Roller Lifters
  • Crane 1.5 Gold Roller Rockers
  • Stud Girdle, Guide Plates and 7/16 Studs
  • MSD Billet Distributor and Red 8.5 mm Wires
  • Edelbrock Victor Jr Intake Manifold
  • Fresh Holley 4781-850 cfm Double Pumper Carburetor


Hard Block 1″ From Deck  Will Help Stabilize Cylinder Walls at 600hp But will not Guarantee Block Cracking Cylinder and Cause Major Damage
+ $ 250.00
Brodix, Dart or ProComp Splayed Cap 100% CNC Race Prepped Block that is Needed for any Power over 600hp
+ $1499.99
JE or Wiseco Power Adder Tool Steel .200″ Thick Wall Wrist Pins
+ $ 195.00
JE or Total Seal Hell Fire Power Adder Ring Package File Fit for the Size of the Power Adder
+ $ 195.00
MLS Power Adder Severe Duty Multi Layer Head Gaskets
+ $ 195.00
Competition Cams 7/4 Swap Power Adder Nitrous Camshaft
+ $ 75.00
Competition Cams Bushed Solid Roller Lifters
+ $ 795.00
Isky Red Zone EZROL Best in the Business Bushed Solid Roller Lifters
+ $1295.00
MSD Crank Trigger
+ $ 325.00
CNC Ported Phenolic Open Spacer, Fasteners and Gaskets
+ $   75.00
NX ML1000 100-250Hp Plate System; Power Adder Over 600Hp is Dangerous, Could Cause Engine Failure, Use AFTERMARK BLOCK Over 600HP
+ $  435.00
Power Master HP Starter Shimmed Correctly and Installed with Bolt kit and Matched with a TCI SFI Flexplate and ARP Fasteners
+ $ 375.00
Moroso Vacuum Pump System Installed and Dyno Tested with Engine
+ $ 995.00

A Stock GM Block was Never Rated for anything over 500Hp. After that the Cylinder Walls can Crack and Cause Major Destruction Including Bodily Harm and Personal Property Damage While Drag Racing or just Driving the Engine Hard. Even with the Better Options it can Still Happen, So All Liabilities, Out of Pocket Damages You will be Individually Responsible for. Racing is a Dangerous Sport and People get Hurt or Killed almost every day in all Kinds of Sport Settings. Its on you and take all Precautions. These Engines are built with the Best Machine work, Assembly Procedures, Products, Dyno Testing and 48 of Experience, we all take the Same Risk.

Dyno Tested and Tuned 110 Fuel • Moroso Air Pump • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or the Nearest Terminal for your Zip Code to Pickup in the 48 States

Comments are closed.

Skip to toolbar