434ci 790 Hp Ford Pro Bracket Race Engine

 

434ci 790Hp Ford Pro Bracket Race Engine

Update for 2023 AFR 220cc Renegade heads, .027″ .027″ 2.0 Light Weight Pistons and Rings, Comp Cams Bushed HD roller lifters, ATI Super Dampener, MLS head gaskets, Manley .120″ wall push rods, Harland Sharp HD Rockers, AFR Stud Girdle.  AwesomeEngines® has been building and racing Naturally Aspirated and Power Adder Ford Racing Engines for 45 Years

$19,975.00 Loaded

9.500″ Deck | 4.155″ Bore | 4.000″ Stroke | 6.200″ Rods | 790 Hp @ 7400 rpm

Components

  • Dart 31365235 SHP CNC Race Prepped Splayed Cap Race Block
  • ARP 12 Point ½” Head Stud Kit Plate Honed with the Block
  • Dart Coated Cam Bearings, Brass Plugs and Block Small Parts Kit
  • K1 or Scat 4340 Internally Balanced Steel Crank
  • K1 H Beam Rods with ARP 2000 Rod Bolts
  • King Race Series Main and Rod Bearings
  • JE or Wiseco 15:1 Forged 2618 Pro Series Pistons
  • JE AP Steel .027/.027/2.0mm Power Adder Rings
  • Comp Cams .750″ Lift Solid Roller Cam Shaft
  • Cloyes True Roller Timing Set with Torrington Bearing
  • Competition Cams HD Bushed HIPPO Solid Roller Lifters
  • ATI Super Damper Specific Honed to Fit Crank Shaft
  • AFR #1451 220-58cc 334/255 with 2.100/1.570 8.0 mm Valves
  • PAC 8027 Racing 1.550″ Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Severe Duty Head Gaskets
  • Manley or Trend .120″ Wall Chrome Moly Push Rods
  • Harland Sharp 1.6 Rockers and Stud Girdle
  • AwesomeEngines® CNC Engraved Custom Valve Covers
  • Melling M83HV Oil Pump and Moroso Pick Up
  • Moroso Aluminum Front or Rear Sump 7 qt. Oil Pan
  • Super Victor 4150 CNC Match Ported
  • Holley or QFT 1000 cfm Carburetor and Jomar Spacer
  • MSD Black Pro Billet Distributor, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

Cometic or Fel Pro MLS Severe Duty Head Gaskets
+ Included
JE or Wiseco Pro Series 2618 Forged Power Adder Pistons and Tool Steel Wrist Pins
+ Included
Oring Block, Receiver Groove Heads and SCE Copper Head Gaskets
+ $ 275.00
Dart Lightweight Aluminum Block Engine
+ $3975.00
JE AP Steel Lightweight .027-.027-2.0mm Duty Power Adder Ring Set
+ Included
Brodix BP HH F302 Head Hunter 15° 100% CNC Ported Heads 413/247 @ .800″, Glidden Victor 2828 Intake, Jesel or T&D Rockers for 880HP
+ $3475.00
Competition Cams Bushed Hippo Roller Lifters
+ Included
Manley or Trend .120″ Wall Chrome Moly Push Rods
+ Included
AFR Stud Girdle
+ Included
Titanium Intake Valves
+ $875.00
Jesel Shaft Rocker System that does not require Stud Girdle
+ $1075.00
Isky EZ-Roll X Helix Bushed Hippo Solid Roller Lifters
+ $ 775.00
Moroso Complete Vacuum Kit with Pump Installed Relief Valve
+ $1075.00
MSD Crank Trigger Installed
+ $ 275.00
ATI SFI Super Dampener
+ Included
Power Master Starter, TCI SFI Flexplate and ARP 12 Point Fasteners
+ $ 295.00

Dyno Tested & Tuned with 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or Terminal Closest to your Zip Code for Pickup in the 48 States

Comments are closed.

Skip to toolbar