434ci 775 Hp Ford Bracket Race Engine


434ci 775Hp Ford Bracket Race Engine

AFR 220cc Renegade heads, Comp Cams Bushed HD roller lifters, ATI Super Dampener, MLS head gaskets, Manley .120″ wall push rods, Harland Sharp HD Rockers, AFR Stud Girdle.  AwesomeEngines® has been building and racing Ford Racing Engines for 37 Years with and without NOS, they are very fast, light and when people see the ET, they think it is a big block until you open the hood; Then they are sick


9.500″ Deck | 4.155″ Bore | 4.000″ Stroke | 6.200″ Rods | 775 Hp @ 7400 rpm


  • Dart 31365235 SHP CNC Race Prepped Splayed Cap Race Block
  • 12 Point ½” Head Stud Kit Plate Honed with the Block
  • Dart Coated Cam Bearings, Brass Plugs and Block Small Parts Kit
  • K1 or Scat 4340 Internally Balanced Steel Crank
  • K1 H Beam Rods with ARP 2000 Rod Bolts
  • King Race Series Main and Rod Bearings
  • JE or Wiseco 15:1 Forged 2618 Pro Series Pistons
  • 043-043-3.0 mm or 1/16-1/16-3/16 Plasma Moly Rings
  • Comp Cams .750″ Lift Solid Roller Cam Shaft
  • Cloyes True Roller Timing Set with Torrington Bearing
  • Competition Cams HD Bushed HIPPO Solid Roller Lifters
  • ATI Super Damper Specific Honed to Fit Crank Shaft
  • AFR #1451 220-58cc 334/255 with 2.100/1.570 8mm Valves
  • PAC 8027 Racing 1.550″ Springs and Titanium Retainers
  • Cometic or Fel Pro MLS HP Head Gaskets
  • Manley or Trend .135″ Wall Chrome Moly Push Rods
  • Comp Cams Pro Magnum 1.6 Rockers and Stud Girdle
  • AwesomeEngines® CNC Engraved Custom Valve Covers
  • Melling M83HV Oil Pump and Moroso Pick Up
  • Moroso Front or Rear Sump 7 qt. Oil Pan
  • Super Victor 4150 CNC Match Ported
  • Holley or QFT 1000 cfm Carburetor and Jomar Spacer
  • MSD Black Pro Billet Distributor, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight


Dart Lightweight Aluminum Block Engine
+ $3975.00
JE GFX Hell Fire, Total Seal Stainless Steel, TNT Severe Duty Power Adder Ring Set
+ $ 175.00
Brodix BP HH F302 Head Hunter 15° 100% CNC Ported Heads 413/247 @ .800″, Glidden Victor 2828 Intake, T&D Rockers for 830HP
+ $1975.00
Titanium Intake Valves
+ $875.00
Oring Block, Receiver Groove Heads and SCE Copper Head Gaskets
+ $ 275.00
Jesel Shaft Rocker System Installed and No Stud Girdle Required
+ $1075.00
Isky EZ-Roll X Helix Bushed Hippo Solid Roller Lifters
+ $ 775.00
Moroso Complete Vacuum Kit with Pump Installed Relief Valve
+ $1075.00
MSD Crank Trigger Installed
+ $ 275.00

Dyno Tested & Tuned with 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or Terminal Closest to your Zip Code for Pickup in the 48 States

Comments are closed.

Skip to toolbar