451CI 850 Hp Bracket Ford Race Engine

 

451ci 850Hp Ford Pro Bracket Race Engine

One of the Best Small Block Ford Engines with Brodix HH F 302cc 15° CNC Ported heads flowing 413/247 cfm @.800″, Victor Glidden 2828 Ported Intake, Comp Cams Bushed HD roller lifters, ATI Super Dampener, MLS head gaskets, .135″ wall 3/8″ push rods, Jesel Pro Series Shaft Rockers. AwesomeEngines® has been building and racing Naturally Aspirated or Power Adder Ford Race Engines for 45 Years

$23,975.00

9.500″ Deck | 4.185″ Bore | 4.100″ Stroke | 6.200″ Rods | 850 Hp @ 7400 rpm

Components

  • Dart 31365235 SHP CNC Race Prepped Splayed Cap Race Block
  • 12 Point ½” Head Stud Kit Plate Honed with the Block
  • Dart Coated Cam Bearings, Brass Plugs and Block Small Parts Kit
  • K1 or Lunati 4340 Internally Balanced Steel Crank
  • K1 or Molnar H Beam Rods with ARP 2000 Rod Bolts
  • King Race Series Main and Rod Bearings
  • JE or Wiseco 15:1 Forged 2618 Pro Series Pistons
  • JE SP Steel 027-027-2.0 mm Power Adder Rings
  • Comp Cams Steel Billet Solid Roller Cam Shaft
  • Cloyes True Roller Timing Set with Torrington Bearing
  • Comp Cams HD Bushed HIPPO Solid Roller Lifters
  • ATI Super Damper Specific Honed to Fit Crank Shaft
  • Brodix HH F 302cc 15° CNC Ported Heads, 2.180/1.600 Valves
  • PAC 8027 Racing 1.550″ Springs and Titanium Retainers
  • Cometic or Fel Pro MLS HP Head Gaskets
  • Manley or Trend 3/8 x .135″ Wall Chrome Moly Push Rods
  • Jesel or T&D Shaft Rockers
  • AwesomeEngines® CNC Engraved Custom Valve Covers
  • Melling M83HV Oil Pump and Moroso Pick Up
  • Moroso Front or Rear Sump 7 qt. Oil Pan
  • Victor Glidden CNC Match Ported 4500 Intake and Spacer Kit
  • Holley or QFT 4500 1050 cfm Carburetor and Jomar Spacer
  • MSD Black Pro Billet Distributor, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

468ci 880 Hp with Callies 4.250 Ultra Boost Steel Billet Crankshaft, 6.250 H Beam Rods
+ $1475.00
479ci  910Hp with Callies 4.350″ Ultra Boost Steel Billet Crankshaft 6.250″ Ultra Series Rods with L19 Bolts
+ $1975.00
Titanium Intake Valves
+ $ 875.00
Inconel Exhaust Valves
+ $  275.00
Oring Block, Receiver Groove Heads and SCE Copper Head Gaskets
+ $ 275.00
Jesel Shaft Rocker System with Roller Tip
+ $ 275.00
Isky EZ-Roll X Helix Bushed Hippo Solid Roller Lifters
+ $ 775.00
Moroso Complete Vacuum Kit with Pump Installed Relief Valve
+ $1275.00
MSD Crank Trigger Installed
+ $ 275.00

Dyno Tested & Tuned with 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or Terminal Closest to your Zip Code for Pickup in the 48 States

Comments are closed.

Skip to toolbar