454ci BBC Street or Marine Short Block

$3995.00

Gen-V Perfect One Piece Rear Seal 4 Bolt Main Stock Block from GM (does not have mechanical provision for fuel pump; must use electric or upgrade to GEN-4 block), everything else is exactly Gen-IV and requires a core on the block) • Sunnen CH-100 Aligned Honed • CNC Blueprint Blocks on 4.840″ Bore Space • CNC Square Deck to 9.800″ • CNC Radial Clear for 4.250″ Stroke • Plate Honed to Final 4.250 up to 4.280 .030, .040, .060″ over Bore • Hot Wash with Soap and Water • Install New Cam Bearings • Brass Plugs • GM 4.0″ 454 External STD. Crank Shaft and Harmonic Balancer • GM 6.135″ I Beam Rods • Flat Top Sealed Power Cast Pistons • Moly Rings • King or Mahle Bearings • One Piece Rear Seal Kit

OPTIONS

Gen-4 Two Bolt Block is $495.00 and GEN-4 Four Bolt Block Core

+ $975.00

Mahle Forged Flat Top Pistons with Mahle .043-.043-2.0mm Lightweight File to Fit Ring set

+ $ 575.00

GEN IV Two Bolt Two Piece Rear Main Seal Block Four Axis CNC Dead On Blue Print Specifications with Fuel Pump Location

+ $ 575.00

GEN IV Four Bolt Two Piece Rear Main Seal Block Four Axis CNC Dead On Blue Print Specifications with Fuel Pump Location

+ $ 975.00

4544000613522004340 Steel Forging One Piece Rear Main Seal Internally Balanced Crank Shaft

+ $ 675.00

4544000613522004340 Steel Forging Two Piece Rear Main Seal Internally Balanced Crank Shaft

+ $ 675.00

489ci 4.250″ 4.280″ Eagle or Scat Cast One Piece Externally Balanced Stroker Crank, I Beam 6.135″ Rods, Stroker Clearance Block

+ $ 575.00

489ci 4.280″ 4.250″ Eagle or Scat Cast Externally Balanced Stroker Crank, I Beam 6.135″ Rods, Stroker Clearance Block

+ $ 775.00

496ci with .060″ 4.310″ Bore, 4.250″ Eagle or Scat Cast Ext. Stroker Crank, I Beam 6.135″ Rods, Stroker Clearance Block

+ $ 875.00

COMP Cams or Erson Hydraulic Flat Tappet Cam, Lifter and Timing Kit

+ $ 655.00

COMP Cams or Erson Hydraulic Roller Cam, Lifter and Timing Kit

+ $1300.00

SFI Approved Harmonic Dampener Specific Honed to Crankshaft Specifications

+ $ 275.00

ATI SFI Super Dampener Specific Honed to Crankshaft Specifications

+ $ 395.00

Fel Pro #1071 MLS Marine Grade Severe Duty Head Gaskets

+ $ 175.00

Short Block Complete Kit; Stock Flat Tappet Hydraulic Cam, Lifter, Timing, Gaskets, GM Cover, 8 Quart Oil Pan, Oil Pump Ext Dampener Kit

+ $ 895.00

Deluxe Short Block Kit

+ $ 675.00

GM Long Block Kit with Small Oval Port Heads, Rockers, Guide Plates, Push Rods Valve Covers and Gaskets

+ $1975.00

Cam Shaft Kit

Flat Tappet Cam Shaft Kit for Required Application (no warranty)

Double Roller Timing Chain and Gear Component Kit

Degree Camshaft to Intake Valve Opening

Camshaft Plate Kit

Deluxe Short Block Kit

GM Steel Timing Cover Kit, 8″ External Dampener and TDC Verified Pointer

GM HP 80lb Oil Pump, Shaft, Stud and Welded Pick Up Tube Kit

Moroso 7 Quart Baffled Hi-Performance Oil Pan Kit

Timing Cover and One-Piece Oil Pan Gaskets

All Short Blocks Come with a Blue Print and Balance Sheet, All Product Information and Instructions are Included

Bare cast iron and short blocks have to be shipped LTL truck “freight collect” to destiny terminal for pickup or commercial address needing forklift to remove freight from truck at my discounted rate