481ci 786 Hp SBC Biggest Dawg Ultra Pro Street Engine

481ci 786 Hp SBC Biggest Dawg Ultra Pro Street Engine

481ci 786Hp SBC Ultra Pro Street Engine with Top of the Line Internals are built with the Dart LM2 or Iron Eagle Raised Cam Block Steel Billet Splayed Caps, 11:1 Compression with AFR 245cc Totally CNC Ported Heads, NA 93 Pump Gas or NOS Ready for 1000 for Pro Street Driving. Reliability, Expertise all in one Complete Package

$25,975.00

9.500″ Deck | 4.185″ Bore | 4.375″ Stroke | 6.250″ Rods | 650lb@ 4600 / 786Hp @ 6600 rpm

Components Included

  • Dart Little M2 9.500″ Steel Billet Cap 100% CNC Machined Block
  • Dart Block Kit with Coated 50mm Cam Bearings, Brass Freeze Plugs
  • ARP Head Stud Kit Plate Honed with the Block
  • Callies Steel Billet Internally Balanced 4330 Steel Crank
  • K1 Steel Billet or Manley H Beam 4340 Rods, ARP 2000 Rod Bolts
  • King Race Series Main and Rod Bearings
  • JE or Wiseco 11:1 Compression 14cc Dish 2618 Forging Pistons
  • GFX or Total Seal .043 .043 3.0mm Plasma Moly File To Fit Ring Set
  • Competition Cams 7/4 Swap Steel Billet Roller Camshaft
  • Competition Cams Sportsman Bushed Roller Lifters
  • Cloyes Billet Roller Timing Set with Torrington Bearing
  • Cloyes Aluminum Timing Cover, TDC Billet Pointer
  • ATI Super Damper Specific Honed to Fit Crank
  • AFR 1138-TI 245cc Competition CNC Ported Aluminum Heads
  • AFR 2.125-1.600″ Stainless Steel 8.0 mm Valves
  • Pac Racing Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Head Gaskets
  • Trend Taper Wall 7/16 x .165″ Wall Push Rods
  • Jesel Pro Series 1.6 Ratio Shaft Rocker System
  • AwesomeEngines® CNC Engraved Sheet Metal Valve Covers
  • Moroso Complete Oil Pump Kit
  • Moroso Stroker 7qt. Oil Pan
  • Dart CNC Match Ported Single Plane Intake
  • Holley or QFT 1050 cfm Dyno Tuned Carburetor and Spacer Kit
  • MSD Pro Billet Distributor, 8.5 mm Wires, NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

Brodix Aluminum Block: HIP +$600 / RLRCB 55mm Labor +$285 / .903 +$299 / Bush Labor +$900 / Align Hone +$475 / Spcl Dk Hght up to 9.9″ +$200 / Head Stud Kit +$200
+ $2595.00
Dart HIP Aluminum Final Align Honed Block: RLRCB 55mm Labor +$300 / .903 +$300 / Bush Labor Only +$900 / Head Stud Kit +$200
+ $2975.00
Jesel Raised Cam Billet Belt Drive System Installed
+ $ 1275.00
Isky Red Zone EZ-ROLL Bushed Roller Bearing Lifters
+ $ 675.00
Moroso 22164 Billet Aluminum Oil Pump Kit
+ $ 275.00
Fast or Holley 1200 Hp Fuel Injection System Dyno Tested and Tuned
+ $1975.00
Awesome Engines CNC Engraved Logo Your Color Powder Coated Covers with Billet Oil Fill
+ $ 200.00

Dyno Tested and Tuned with 93° Exxon • Vacuum Pump Kit Installed • HP Corrected To Sea Level

Free Freight Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar