495ci 990 Hp SBC Magnum Race Engine

495ci 990 Hp SBC Magnum Race Engine

This 4.400 Bore Space 495ci SBC was one of the 1st ever built that still has the very best Internals and the Brodix Aluminum Block and Heads for a Perfectly Matched Proven Power SBC Race Engine that Matches most BBC Engines in Power and is 150lbs Lighter than Most

$29,995.00

9.550″ Deck | 4.185″ Bore | 4.500″ Stroke | 6.300 Rods | 990 HP @ 8200 rpm

Components

  • Dart or Brodix Hipped Raised Cam 100% CNC Aluminum Race Block
  • ARP Specific Aluminum Head Stud Kit Plate Honed with Block
  • Callies Steel Billet 4330VM No Drill Internally Balanced Crank
  • Callies Ultra I Beam Steel Rods and L19 Rod Bolts
  • Clevite or King “HP” Series Main and Rod Bearings
  • JE or Wiseco 15:1 2618 Forged Pistons
  • JE Tool Steel .180″ Thick Wall Wrist Pins
  • Total Seal Stainless Steel 043-043-3.0 mm Low Tension Rings
  • Comp Cams  Steel Billet LS-FO Swap Roller Cam
  • Jesel Raised Cam Belt Drive System
  • Isky Red Zone EZ Max Bushed .904″ HIPPO Roller Lifters
  • ATI Super Damper Specific Honed to Crank (best in the business)
  • AwesomeEngines® Billet TDC Pointer

  • Brodix BD 2000 Fully CNC Ported Heads flow 422/290.800
  • Brodix 2.200″ Intake w/1.580″ Exhaust Stainless Steel Valves
  • Manley 221456 Lightweight Springs and T-Retainers
  • Cometic or Fel Pro MLS Head Gaskets
  • Trend 7/16 x .165″ Taper-wall Push Rods
  • Jesel or T&D Pro Series Shaft Rocker System
  • AwesomeEngines® CNC Engraved V-Covers
  • Moroso External Billet Oil Pump
  • Moroso Aluminum Pro Eliminator Oil Pan
  • Fully Ported Intake Manifold
  • Holley or QFT 1150 cfm Carburetor and CNC Ported Spacer
  • MSD Distributor, Crank Trigger, 8.5 mm Wires, NGK Plugs
  • AwesomeEngines® Free 48 State Freight

Upgrades

Trend Products Tool Steel .220″ Thick Wall Wrist Pins that Require Heavy Metal and Included in Price
+ $ 375.00
Moroso Vacuum Pump System, Pump Mounted Relief Valve and Billet Light Weight Mandrel (dyno tested)
+ $1075.00
Moroso 5 Stage Dry Sump System Complete (vacuum pump not needed)
+ $2975.00
Sheet Metal Intake
+ $1975.00
Sheet Metal Intake, 2×4 Carbs, Linkage 1050Hp Dyno Tested
+ $3475.00
Holley Terminator EFI System
+ $1475.00
Ron’s Terminator Fuel Injection Installed and Dyno Tuned
+ $2275.00

Dyno Tested & Tuned with C16 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar