638ci 1075 Hp Ford Bracket Race Engine

638ci 1075 Hp Ford Bracket Race Engine

Bigger Cubic Inch is always better, Comp Cams Bushed HD roller lifters, ATI Super Dampener, MLS head gaskets, Manley .120″ wall push rods, Harland Sharp HD Rockers, TFS Stud Girdle.  AwesomeEngines® has been building and racing Ford Racing Engines for 37 Years with and without NOS and just as good as any and better than most!


10.300″ Deck | 4.700″ Bore | 4.600″ Stroke | 6.800″ Rods | 1075Hp @ 7000 rpm


  • Eliminator Sportsman Splayed Cap 4 Axis CNC Race Prepped Block
  • ARP Head Stud Kit Plate Honed with Block
  • 44604600 Internally Balanced 4340 Steel Crank
  • K1 H-Beam Rods with ARP 2000 Bolts
  • King Race Series Main and Rod Race Bearings
  • JE or Wiseco 2618 Forged 14:1 Pistons
  • JE or Wiseco .180 Wall Tool Steel Wrist Pins
  • Total Seal Stainless Steel TNT or Hell Fire Rings
  • Competition Cams .800″ Solid Roller Camshaft
  • Cloyes Billet True Roller with Torrington Bearing
  • Timing Cover and TDC Pointer
  • Competition Cams HIPPO Roller Lifters
  • ATI Super Damper Specific Honed to the Crank Shaft
  • TFS5451T804C03 Fully CNC Ported 360cc Intake Aluminum Heads
  • TFS 2.400/1.880 Stainless Intake and Exhaust Valves
  • PAC Racing Triple Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Racing Head Gaskets
  • Harland Sharp Roller Rockers and TFS Stud Girdle
  • Manley 3/8 x .135″ Wall Severe Duty Chrome Moly Push Rods
  • Melling Oil Pump Moroso Pick Up Tube
  • Moroso 8 Qt. Stroker Oil Pan
  • AwesomeEngines® CNC Engraved Ford Motor-Sport Valve Covers
  • TFS53400112 100% CNC Match Ported Intake Manifold
  • Holley or QFT 1450cfm FX Carburetor Jomar CNC Ported Spacer
  • MSD Distributor, 8.5mm Spark Plug Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight


659ci = 4.7″ Bore x 4.75″ Stroke 1120/HP with a 4460475067002203 Super Light Crank Shaft, CFE 2×4 with 1450cfm each and Linkage Kit, Dyno Tested & Tuned
+ $3475.00
Oliver Steel I Beam Rods with L19 Rod Bolts
+ $  875.00
Callies Ultra I Beam Rods with L19 Rod Bolts
+ $1075.00
.240″ Wall Tool Steel JE or Wiseco Wrist Pins
+ $  250.00
Competition Cams HD Bushed Hippo Roller Lifters
+ $  675.00
Jesel or T&D Pro Series Shaft Rocker System
+ $1495.00
MSD Crank Trigger System
+ $  275.00
Moroso Complete Vacuum Pump System Dyno Tested with Engine
+ $1075.00
SFI Flexplate and PowerMaster Starter Kit
+ $ 375.00

Dyno Tested and Tuned with 112 Fuel • Vacuum Pump • Crank Trigger • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or Terminal Closest to your Zip Code for Pickup in the 48 States

Comments are closed.

Skip to toolbar