BBC 518ci 675 Hp Pro Street Crate Engine

BBC 517ci 675 Hp Pro Street Crate Engine

$9,975.00

518ci Pro Street Crate Engine is built with a GM Gen V 4 Bolt Main block blueprint race prepared on a 4 Axis CNC machining center. Brand new internally, balanced and blue printed 4340 Rotator, forged JE or Wiseco 15cc high performance pistons, roller camshaft and 320cc aluminum square port heads that uses pump gas, has tons of torque and great power

9.800″ Deck | 4.280″ Bore | 4.500″ Stroke | 6.535 | 675 Hp @ 6600 rpm

Components

  • GM Gen V 9.800 4 Bolt Main 100% CNC Race Prepped Block
  • ARP Head Bolt Kit Plate Honed with the Engine Block
  • DuraBond Cam Bearings and Brass Freeze Plugs
  • 4340 Internally Balanced Steel Crank One Piece Rear Main Seal
  • 4340 Steel H-Beam Full Floating Rods with ARP 8740 Bolts
  • Clevite or King Race Series Main and Rod Bearings
  • JE or Wiseco Custom 15cc 2618 Forged 10.34:1 Compression Pistons
  • JE or Wiseco .180″ Wall Wrist Pins
  • Total Seal Plasma Moly File to Fit 043/043/3.0 mm Rings
  • Comp Cams or Erson Pro Street Roller Cam and Lifter Kit
  • Roll Master Double Roller Torrington Bearing Indexable Timing Kit
  • GM Chrome Timing Cover Kit and TDC Pointer
  • SFI SS 8″ Dampener and Billet TDC Pointer

  • Bracket 320cc Aluminum In House Race Prepped New Heads
  • 2.225 Intake and 1.880 Exhaust Valves
  • PAC 1.550″ Springs and Chrome Moly Retainers
  • Fel Pro 1017 Hi Performance Head Gaskets
  • Comp Cams Ultra Gold Rockers Manley 3/8 x 135″ Wall Push Rods
  • AwesomeEngines® Aluminum Valve Covers
  • Moroso #22175 Oil Pump and Proper Pick Up Kit
  • Moroso 7 QT. Pro Series Drag Race Oil Pan
  • Moroso 1 Piece Preformed Oil Pan Gasket
  • Edelbrock Victor R Single Plane Intake Manifold
  • Holley or QFT 1050 CFM Double Pumper Carburetor and Spacer Kit
  • Billet Distributor, MSD 8.5mm Wires and NGK Spark Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

Cometic or Fel Pro MLS High Performance Head Gaskets
+ 125.00
JE Hell Fire Power Adder Ring Set
+ $ 175.00
Competition Cams or Erson Bushed Hippo Roller Lifters
+ $ 675.00
Jomar Light Weight Stud Girdle Kit
+ $ 225.00
MSD Billet Slip Collar 85561 Distributor and Melonite Gear for Roller Camshaft
+ $ 195.00
MSD Crank Trigger
+ $ 325.00
Moroso Vacuum Pump System, Pump Mounted Relief Valve, Mandrel, Lines, Billet Tank and All Hardware
+ $1075.00

Dyno Tested & Tuned with 93° Exxon • HP Corrected To Sea Level

Free Freight Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar