BBC 565ci 1025 Hp Pro Magnum Race Engine

BBC 565ci 1025 Hp Magnum Race Engine

BBC 565ci 1025 Hp Magnum Race Engine is the Best with all USA Parts used in this Engine; Big M 2 Raised .400 Cam Steel Billet Cap, 55 mm Cam and .904″ Lifter Block, Callies Ultra Steel Billet Crank, Ultra Rods, 55 MM Cam, Isky Red Zone EZX Lifters, Jesel Belt Drive and Shaft Rockers, Quick 16 Pistons, Hell Fire Rings, ATI Dampener, 100% CNC Ported 24° 365cc Heads, MSD, Crank Trigger and a 1250 Carburetor. Nothing Needed to Add on to go Racing with a Deadly Consistent Bracket or Grudge Race Turn Key Package. Up to 300 Hp of NOS Available


9.780″ -0- Deck | 4.600″ Bore | 4.250″ Stroke | 6.535″ Rods | 800 lbs @ Hp @ 5800 rpm 1025 Hp @ 7800 rpm


  • Big M2 Pro Steel Billet Splayed Cap Raised .400″ 55mm Cam Race Block
  • ARP Head and Dart Inner Valley Stud Kit Plate Honed with Block
  • Callies XL 4340 Steel Billet No Drill Int-Balanced Crank and Heavy Metal
  • Callies CSB6535DS3B4AH H-Beam Rods with L19 Bolts
  • Clevite or King Race Series Main and Rod Bearings
  • JE or Wiseco 8 to 14.75:1 Quick 16 Gas Ported Coated Skirt Pistons
  • JE or Wiseco .180″ Wall 9310 Tool Steel Wrist Pins
  • JE Hell Fire or Total Seal TNT .9/.9/3.0 mm File to Fit Rings
  • Competition Cams .800″ Steel Billet 55mm 7/4 Cam
  • Jesel Raised .400 Cam Belt Drive System Installed
  • Isky .904″ EZROLLMAX Needle Free Bushed Solid Roller Lifters
  • ATI Super Dampener Specific Honed To Crank Shaft
  • TDC Verified Billet TDC Pointer
  • Brodix BB3 Xtra Oval Port 365 cc Fully CNC Ported Heads
  • Brodix 2.350-50° 1.880-45° Titanium Intake and Inconel Exhaust Valves
  • Pac Racing Triple Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Head Gaskets
  • Trend 7/16″ Taper Wall Push Rods
  • Jesel or T&D Pro Series Shaft Rocker System
  • AwesomeEngines® Sheet Metal CNC Logo Valve Covers
  • Moroso 22163 Billet Aluminum Race Series Oil Pump
  • Moroso 20385 Aluminum Pro Eliminator Oil Pan with Kick Out
  • Brodix CNC Match Ported Intake Manifold
  • Holley Ultra or QFT 1250 cfm FX Carburetor and Jomar Spacer
  • MSD Billet Distributor, Crank Trigger, 8.5mm Wires, NGK Plugs
  • AwesomeEngines® Free 48 State Freight


Brodix or Dart Hipped Aluminum Block 100% CNC Race Prepped
+ $3995.00
GRP Aluminum Connecting Rods
+ $ 495.00
Callies Ultra 4340V Series I Beam Rods with L19 Rod Bolts
+ $ 595.00
Titanium Exhaust Valves
+ $ 554.00
JE .240″ Wall 9310 Tool Steel Thick Wall Wrist Pins
+ $ 495.00
Moroso Vacuum Pump System Dyno Tested with Engine
+ $1050.00
Moroso 5 Stage Dry Sump System for Poker Runs or Serious Drag Racing
+ $3550.00
Nitrous Express 100-300 Hp Plate System with almost 1400 Hp and 1200lbs with .200″ Wall Tool Steel JE Pins and Extra Heavy Metal Needed to Balance
+ $1275.00
Steel Billet USA Flywheel Confirmed or Touched Up in House Internally Balanced
+ $495.00

Dyno Tested and Tuned with 112 Race Fuel • Vacuum Pump • HP Corrected To Sea Level

Free Freight Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar