BBC 632ci 1130 Hp Pro Bracket Race Engine

BBC 632ci 1130 Hp Pro Bracket Race Engine


10.195″ -0- Deck | 4.600″ Bore | 4.750″ Stroke | 6.760″ Rods | 880 lb @ 5800-1130 Hp 7200 rpm

Dart Big M2 Steel Billet Cap .400″ Raised 55 mm Cam Race Block, 4340 Steel Billet Internally Balanced 8-CW Crank, Molnar SD H-Beam Rods, ARP 2000 Bolts, HH MC 395 cc 100% CNC Ported Heads, Wiseco 15.5:1 Quick 16 Pistons, 9310 Tool Steel Pins, AP Steel .9-.9- 3.0 mm Rings, CNC Match Ported Intake, 1450 CFM Carburetor, Inner Valley Stud Kit, Competition Cams HD Bushed Needleless Hippo Roller Lifters, MLS Head Gaskets, ATI Super Dampener, Crank Trigger with this Turn Key Race Engine Shipped 48 State Freight


  • Dart Big M2 .400″ RC Steel Billet Cap 100% CNC Race Prepped Block
  • ARP Head and Inner Valley Stud Kit Plate
  • Steel Billet Center Counterweight 4340 Internally Balanced Crank
  • Molnar Severe Duty 4340 6.700″ H-Beam Steel Rods and ARP 2000 Bolts
  • Clevite or King HP Main and Rod Bearings
  • Wiseco 15:1 Quick 16 Gas Ported Coated Skirt Pistons
  • Wiseco .180″ Wall 9310 Tool Steel Wrist Pins
  • Total Seal .9/.9/3.0 mm Steel Ring Set
  • Competition Cams .800″ Lift 7/4 Swap Steel Billet Roller Camshaft
  • Competition Cams HD Bushed Severe Duty Hippo Solid Roller Lifters
  • Jesel Raised Cam Belt Drive  Kit
  • ATI Super Dampener Specific Honed To Crank
  • BP HH BB 395cc MC Fully CNC Ported Heads,2.400/1.85-477/315 Air Flow
  • Pac Racing 1.650″ Triple Roller Springs, Titanium 10° Retainers
  • Cometic or Fel Pro Multi Layer Steel Head Gaskets
  • Trend Taper Wall 7/16″ Severe Duty Push Rods
  • Jesel or T&D Pro Series Shaft Rockers
  • AwesomeEngines® Sheet Metal CNC Logo Valve Covers
  • Moroso 22163 Billet Aluminum Oil Pump with Integral Pick Up
  • Moroso #20385 Aluminum Pro Eliminator 8 Quart Oil Pan
  • Brodix BM2017 100% CNC Match Ported Intake with Turtle
  • Jomar CNC Ported 1¼” Spacer
  • Holley GEN3 or QFT FX 1450 CFM Carburetor
  • MSD Billet Distributor, Crank Trigger, 8.5mm Wires and NGK Plugs


Callies Magnum or Crower Enduro USA Series Crank Internally Balanced with Heavy Metal Included
+ $1475.00
Brodix BRX 20° Optional 444cc Intake Runner CNC Ported Chamber Head Package +24 HP and 7800 RPM
Isky EZ-ROLL­™ X Helix Bushed 1400 lb Open Pressure Roller Lifters
+ $ 675.00
Moroso Complete Vacuum Pump System Dyno Tested with Engine
+ $ 975.00
Power Master Ultra Starter, TCI SFI Flexplate and ARP Fasteners
+ $ 375.00

Dyno Tested and Tuned with 112 Fuel • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or Terminal Closest to your Zip Code for Pickup in the 48 States

Comments are closed.

Skip to toolbar