LS3 428ci 715 Hp Pro Street Engine

LS3 428ci 715 Hp Pro Street Engine

$14,975.00

9.240″ Deck | 4.065″ Bore | 4.125″ Stroke | 6.125″ Rods | 625lb 5000 – 715 Hp @ 6800 RPM

Components

  • GM New LS2 Aluminum 100% CNC Race Prepped Block
  • Callies CompStar 58 Toot 4340 Internally Balanced Steel Crank
  • Callies CompStar H-Beam 6.125″ Bushed ARP 2000 Bolts Rods
  • King Race Series Main and Rod Bearings
  • JE or Wiseco 11:1 2618 Forged Pistons
  • JE or Wiseco Tool Steel Wrist Pins
  • Wiseco GFX 1.2-1.2-3.0 mm Lightweight Steel Top Ring Set
  • Competition Cams .600″ Hyd Roller Cam
  • Comp Cams HIPPO Short Travel Hydraulic Roller Lifters
  • Rollmaster IWIS Billet Double Roller Timing Kit
  • GM Front and Rear Covers
  • ATI SFI Super Dampener Internally Balanced
  • AFR Mongoose 260cc Fully CNC Ported LS3 Aluminum Heads
  • PAC Racing Hydraulic Roller Springs and Titanium Retainers
  • Cometic or Fel Pro or GM MLS Head Head Gaskets
  • ARP Head Stud Kit Plate Honed with Block
  • Manley 3/8 x .135″ Wall Chrome Moly Severe Duty Push Rods
  • GM LS3 Rocker Arm System
  • Melling Oil Pump and Pick Up
  • Moroso 7 Quart Windage Steel Oil Pan
  • Trick Flow Intake Manifold with 4150 Top
  • Holley Logo Aluminum Valve Covers
  • Actual Blue Print and Balance Sheets
  • Free 48 State Freight

OPTIONS

K1 Steel Billet H-Beam Steel Rods with ARP 2000 Rod Bolts
+ $ 275.00
K1 4340 Internally Balanced Steel Crank 24 or 58 Reluctor
+ $ 275.00
MSD Billet Front Mounted Distributor, 8.5 mm Wires and NGK Spark Plugs
+ $ 975.00
MSD Distributor-less Ignition System Dyno Tested and Tuned
+ $ 975.00
Dyno Holley or QFT 950 cfm 4150 Carburetor, #6 Fittings, Stud Kit, Gasket and Jomar Spacer
+ $ 775.00
Moroso Vacuum Pump System Dyno Tested and Set up with the Engine
+ $ 975.00

Dyno Tested and Tuned with 91° Fuel • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to this Item Shipped to a Commercial Address or the UPS Terminal Closest to Your Zip Code for Pickup in the 48 States.

Comments are closed.

Skip to toolbar