444CI SBF 700HP Bad Dawg Street Crate Engine

444ci 700Hp SBF Bad Dawg Pro Street Heat Crate Engine

$13,999.00

9.500″ Deck | 4.155″ Bore | 4.100″ Stroke | 6.200 Rods | 700Hp @ 6800 rpm

Components

  • Pro Series New Steel Billet Splayed Cap 1500HP Race Block
  • 12 Point Head Stud Kit Plate Honed w/Your Block
  • Stainless Steel or Brass Life-Time Freeze Plug Kit Installed
  • K1 4340 Internally Balanced Steel Crank
  • K1 Steel Billet FH6200ALLb8A 4340 H-Beam Rods w/ARP2000
  • King “HP” Series Main and Rod Bearings
  • Mahle 10.5:1 Forged 2618 Pistons (8-13:1 ava)
  • 1.5/1.5/3mm File to Fit Moly Light Weight Ring Set
  • AwesomeEngines® Comp Cams Custom .660″ Lift Solid Roller
  • Cloyes Billet True Roller Timing Set
  • New TCF302s Aluminum Timing Cover and TDC Pointer
  • Comp Cams HIPPO Solid Roller Link Bar Lifters
  • Internally Balanced SFI Harmonic Balancer
  • Dart Pro 1 225cc or Brodix Trak 1 Fully CNC Ported Heads
  • Pro Series 2.080″/1.600″ Stainless Steel Valves
  • PSI Polished Double Roller Valve Springs w/Tool Steel or Tit Retainers
  • Fel Pro #1046 Steel Wire Pre-Flattened Head Gaskets
  • Manley .120″ Wall Chrome Moly Push Rods
  • Comp Cams Pro Magnum Roller Rockers
  • AwesomeEngines® CNC Engraved Polished Aluminum Valve Covers
  • AwesomeEngines® Melling M83 Oil Pump w/Proper Pick Up
  • AwesomeEngines®  Moroso Front or Rear 7 Qt Stock Chassis Oil Pan
  • Edelbrock Super Victor Match Ported Intake Manifold
  • AwesomeEngines® Carb Shop 1000cfm New Carburetor and Spacer
  • MSD Pro Billet Distributor, 10.5mm Wires, NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Dart SHP #31365235 Small Block Ford Cast Iron Block Fully 4 Axis CNC Race Prepped to 4.185 Bore and 4.250 Radial Clearance
+ $ 155.00
Dart Iron Eagle Small Block Ford Cast Iron Block Fully 4 Axis CNC Race Prepped to 4.185 Bore and 4.250 Radial Clearance
+ $ 895.00
Callies Dragon Slayer EFZ71T-DS 4.100 4340 Internally Balanced Engine (heavy metal may be required)
+ $ 995.00
New Motown SBF Race Match Ported Intake Manifold w/4500 Top and 1050 QFT Carburetor
+ $ 795.00
ATI Super Damper Installed (specify 3/4 bolt, late or early)
+ $ 325.00
AwesomeEngines® Jomar Pro Series Stud Girdle System Installed
+ $ 95.00
T&D Shaft Mounted Rocker System Installed
+ $ 995.00
SFI 157 or 164 Tooth Flex-plate Internally Balanced in House w/ARP Bolts
+ $ 135.00
AwesomeEngines® Pro Series Gear Reduction New Design Heavy Duty Starter
+ $ 155.00
NX Gemini 100-500HP Plate System Installed, Stainless Steel Rings, N2O MLS Head Gaskets, .N2O 170″ Pins
+ $ 955.00
APGSBF2000HP REID SFI Case and Ford Bell Housing, Pro Lite Trans Brake,  NASA Input, 4340 Output 1.80 Gear Set, Alto Racing Clutches and Deep Pan
+ $4499.00
TH400 1500HP Ford REID SFI Case w/Ford Bell Housing w/Register. Pro Lite Trans Brake, Updated Sprag, Alto Racing Clutches and Deep Pan
+ $4699.00
10″ XHD10″ Trans-brake Racing Convertor, Dual Anti Ballooning Plates, Nitrous Applicable and Built for On or OFF the Spray, Your choice
+ $ 799.00
Fast EZ EFI Complete EFI System w/1100cfm TB Dyno Tested and Tuned for the Finest in Pro Street Drive-ability
+ $2499.00

Dyno T&T w/93° Exxon Pump Gas • HP Corrected To Sea

Comments are closed.