540ci BBC1600HP Blown Racing Engine

540ci 1600HP BBC Blown Race Engine

Pro Blown Injected BBC engine is a Pro Magnum on steroids with a mild tune up and plenty left. Lower compression for up to 40 psi of boost making well over 2000+hp, still makes this a Great engine for any type of racing and can be F3 or Twin 104’s if you want


9.800″ Deck | 4.500″ Bore | 4.250″ Stroke | 6.385 Rods | 1600+Hp @ 6800 rpm  w/30 psi Boost


See Actual Dyno Testing of this Engine

  • Dart Big M or PBM-World Merlin III Steel Billet Splayed Cap Block
  • Oring Block w/.041″ Stainless Steel Wire
  • Specific Fit Head Stud Kit Plate Honed w/Block
  • Stainless Steel Freeze Plug Kit Installed for Life Time Service
  • Coated Cam Bearings Installed for Extra Protection
  • Callies Magnum or Crower 4340 Double Key Way Crank
  • Oliver I-Beam Steel Rods or GRP Pro Mod Aluminum
  • Coated King “HP” Race Series Main and Rod Bearings
  • Wiseco Forged Blower Pistons
  • Precision Products Tool Steel .300 x.250″ Wall 2500Hp Rated Pins
  • Total Seal Stainless Steel Ring Package
  • Comp Cams 55mm w/ .800″ Lift Blower Roller Camshaft
  • Milidon Gear Drive System and Cover w/Front Mech Pump
  • Comp Cams HIPPO .904″ Severe Duty Lifters
  • Blower Hub w/ Impregnated Crank Trigger
  • Brodix BPBB3Xtra or Dart Pro 2 380cc Fully CNC Ported Heads
  • Victory Titanium 2.350 Int and 1.880 Exh Valves
  • NexTek 1.677 Triple Springs w/ Titanium Retainers
  • Receiver Groove Heads SCE Copper Head Gaskets
  • Trend ½” x .200″Taper Wall Severe Duty Push Rods
  • Comp Cams Ultra Pro Magnum Rockers
  • Jomar Pro Series Stud Girdle for Maximum Protection w/Deflection
  • AwesomeEngines® Powder Coated V/Covers with Evac
  • Moroso Billet 22167 Gerotor Oil Pump
  • Moroso #21049 Pro Eliminator Oil Pan
  • BDS or Mert Littlefield 14:71 Full Comp Polished Complete Blower Set Up
  • Enderle Complete Buzzard Catcher Injection Kit
  • MSD Billet Distributor and Crank Trigger Pick Up
  • 10.5mm UTH Wires, NGK Installed and Ready to Run
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Brodix or Dart Aluminum .904 Lifter, 55mm Cam Bearing Solid Block with Special Head Stud Kit
+ $3095.00
GRP Billet Aluminum Pro Mod Style Connecting Rods (w/additional required clearance)
+ $295.00
565ci 1700Hp Pro Blown Package w/4.600″ Bore
+ $250.00
572-598ci 1800Hp Pro Blown Tall Deck w/4.500 or 4.600″ Bore and 4.500″ Crank Package
+ $250.00
Front Mounted blower Support System For Increased Strength and No Crank Snout Flex
+ $800.00
Moroso 20385 Pro Eliminator Aluminum Oil Pan w/Sectional Oil Control
+ $250.00
BDS or Mert Littlefied High Helix 10-71 Blower
+ $call
Crower Stainless Steel or T&D Pro Series Shaft Rocker System
+ $1195.00
Brodix Man Eater PB1203 Heads w/Titanium 2.520 w/ 1.850 Valves, Intake, Shaft Rockers
+ $6000.00
Brodix Solid Man Eater Fully CNC Ported Heads w/ Tit 2.520 and 1.850 Valves, Shaft Rockers Included
CFE Custom Sheet Metal Blower Manifold w/Burst Panels
+ $2400.00

Dyno Tested & Tuned • HP corrected to Sea Level

Comments are closed.