598CI BBC 1900HP Nitrous Race Engine

598ci 1900HP BBC Nitrous Race Engine

$20,975.00

9.800+$495 or 10.200″ Deck | 4.600″ Bore | 4.500″ Stroke | 6.385/6.700 | 1900 Hp @ 6800 rpm

Components

  • MERLIN III Splayed Cap CNC Race Prepped Block
  • Stainless Steel Lifetime Freeze Plug Kit Installed
  • Brodix Head and Inner Valley Stud Kit Plate Honed w/Block
  • Callies Dragon Slayer 4340 Internally Balanced Crank
  • Oliver Steel I Beam Severe Duty Rods
  • Clevite or King “HP” Racing Series Bearings
  • Wiseco Quick 8 Gas Ported Custom N2O Pistons
  • .200″ Wall Severe Duty N2O Steel Wrist Pins
  • Total Seal Stainless Steel 043bc-043d-3mm Nitrous Rings
  • Comp Cams .850″ Lift 7/4 Billet Roller Cam
  • Cloyes 9-3747 Quick Adjust Billet Timing Set w/True Roller and Torrington
  • AwesomeEngines®/Comp Cams 3 Piece #312 Polished Aluminum T/Cover
  • Comp Cams “HIPPO” Severe Duty Roller Lifters
  • ATI Super Damper and Billet TDC Pointer
  • Big Duke PB1802 456cc CNC Ported Heads
  • Brodix 2.400 Intake and 1.900 Exhaust Valves
  • Pacaloy 1.650″ Triple 948 Springs w/Titanium  Retainers
  • Fel Pro MLS Nitrous Applicable Severe Duty Gaskets
  • Crower Stainless Steel or T&D Shaft Rocker System w/7/16 Push Rods
  • AwesomeEngines® CNC Logo Big Duke Aluminum Valve Covers
  • AwesomeEngines® Moroso 22163 Billet Oil Pump
  • Moroso 21047-9 w/Passenger Side Kick Out and Sectional Oil Control Pan
  • Brodix Big Duke CNC Match Ported 4500 Intake
  • Holley Ultra or QFT 1050cfm FX Series Nitrous Carburetor
  • Jomar Special CNC Ported 1¼” Spacer Kit
  • Nitrous Express NRC 750+Hp New Plate System
  • MSD Dist, Crank Trigger, 10.5mm UTH Wires, NGK Race Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Dart Raised .600 Cam Special Race Block w/Wide Oil Pan and 54mm Camshaft (will require Jesel belt drive $595)
+ $  895.00
Brodix or Dart Aluminum Block Fully CNC Blue-Printed Race Prepped w/Special Stud Kit
+ $3895.00
Callies Magnum Series Internally Balanced Crank (magnum not needed but will require heavy metal)
+ $  595.00
GRP Billet Aluminum Pro Mod Rods Installed (additional clearance is required)
+ $  275.00
Precision .300 x .250 Taperwall Wrist Pins (used for 2 stages or 2500+hp, may require more heavy metal)
+ $  195.00
Titanium Intake Valves Installed
+ $  795.00
Titanium Exhaust Valves
+ $  795.00
Moroso 22167 Billet Gerotor Oil Pump Installed
+ $   95.00
20385 Moroso Pro Eliminator Aluminum Oil Pan
+ $  375.00
Moroso Complete External Oil Pump w/Special 20385 Aluminum Revised Oil Pan w/Special Pickup Installed
+ $  995.00
Moroso Complete 5 Stage Dry Sump System Installed
+ $2995.00
Moroso Accumulator System Installed
+ $  395.00
Moroso New Vacuum Pump System w/Pump Mounted Relief Valve, Mandrel, Lines, Billet Tank and All Hardware
+ $1095.00
NX 200-600Hp Shark Nozzle 2nd Stage System Installed w/L-250 Low Amp Solenoids (tool steel rings and .300″x.250″TW pins w/up to 2400Hp)
+ $1995.00
CV Products Made in the USA Starter, Ultra SFI Flex-plate House Internally Balanced, ARP Flex-plate Bolt Kit
+ $  325.00
“PRO DADDY” 2000HP Brand New Loaded PowerGlide Built for this Application
+ $3895.00
10″ Custom N2O Torque Converter w/Steel Stator Custom Pump and Turbine Built for 1800HP
+ $1495.00
New Complete EZ EFI 2.0 System Dyno Tuned and ready to Race. Complete Nitrous Ready
+ $2495.00

Dyno Tested & Tuned  • Vacuum Pump • HP Corrected to Sea Level

Comments are closed.