BBC 565ci 1600 Hp Nitrous Engine

BBC 565ci 1600 Hp Nitrous Engine

$22,975.00

A Turn Key NOS Engine with all the Correct Needed Tested Parts for up to a 1600 HP NOS Racing Engine. The Best Pistons, .240″ Tool Steel Wrist Pins, BUSHED HIPPO Lifters are a Must, Cloyes Cover with Bearing, Brodix 100% CNC Ported 365cc Oval Port Heads, JESEL or T&D Rockers, Dyno Tuned READY TO RUN, TESTED all for LESS Delivered.

9.800″ Deck | 4.600″ Bore | 4.250″ Stroke | 1700 HP @ 7000 rpm

Components

  • DART BIG M  or WORLD IV 100% CNC Race Prepped Block
  • O-RING BLOCK Install Stainless Steel .041″ Wire
  • ARP Head and DART Inner Valley Stud Kit
  • CALLIES Magnum Internally Balanced Crank
  • OLIVER Steel I Beam Rods with L19 Rod Bolts
  • KING Race Series Main and Rod Bearings
  • JE or WISECO QUICK 16 Gas Ported Coated Skirt Pistons
  • JE .240″ Wall 9310 Tool Steel Wrist Pins
  • TOTAL SEAL 043/043/3.0 mm SS, TNT or Hell Fire NOS Rings
  • COMPETITION CAMS 7/4 Swap Billet .800″ Cam
  • COMPETITION CAM BUSHED HIPPO Needle-less Roller Lifters
  • ROLLMASTER Billet Timing Set, IWIS Chain, Torrington Bearing
  • CLOYES 9-231 2 Piece Aluminum Timing Cover with INT Bearing
  • ATI Super Dampener and Billet TDC Pointer
  • BRODIX O-365cc 100% CNC Ported Heads
  • BRODIX 2.350 x 1.880 Stainless Steel Valves
  • PAC RACING 1247 Triple Springs, Titanium Retainers
  • SCE Copper Head Gaskets and Receiver Groove Heads
  • TREND Taper Wall 7/16 x .165″ Wall Push Rods
  • JESEL or T&D Shaft Rocker System
  • AwesomeEngines® CNC Logo Powder Coated Valve Covers
  • MOROSO 22175 Oil Pump Kit, Tig Welded Pickup, Stud, Shaft
  • MOROSO 21049 Kick Out Steel Eliminator Pan
  • BRODIX CNC Ported Intake Manifold and Jomar Spacer
  • NITROUS EXPRESS NRC Plate System 250 to 750Hp
  • HOLLEY ULTRA  or QFT 1150 cfm Carburetor
  • MSD Distributor, Crank Trigger, 8.5 mm Wires and NGK Plugs
  • AwesomeEngines® Shirt, Free 48 Freight (see 2013 updates)

OPTIONS

STEEL BILLET CAP Option for Either Block
+ $ 425.00
DART BIG M PRO .600 Raised 54 mm Cam Race Block, Wide Oil Pan, JESEL +.600″ Belt Drive
+ $1275.00
BRODIX or DART Aluminum Block 100% CNC Blue-Print Race Prepped Block and Special Stud Kit
+ $3995.00
CALLIES XL Series NO Drill Internally Balanced Crank (heavy metal is included)
+ $ 995.00
CALLIES ULTRA I Beam Rods with L19 Rod Bolts
+ $ 195.00
GRP Billet Aluminum Pro Mod Rods Installed, Radial Clear Block for Rods
+ $ 250.00
PRECISION .300 x .250 Taper-wall Tool Steel Wrist Pins (used for 2 stages or 600+hp, will require more heavy metal)
+ $ 295.00
ISKY EXTREME ZONE EZ ROLLMAX 37296RHMEZMAX Bushed Roller Lifters
+ $ 795.00
JESEL Belt Drive System
+ $795.00
TITANIUM Intake Valves and Copper Beryllium Valve Seats Installed
+ $ 995.00
JESEL or T&D Pro Series 1 Piece Shaft Rocker System
+ $ 475.00
MOROSO 22163 Billet Gerotor Oil Pump Installed
+ $ 275.00
MOROSO #20385 Pro Eliminator Aluminum Oil Pan
+ $ 275.00
MOROSO Vacuum Pump System, Pump Mounted Relief Valve, Mandrel, Lines, Billet Tank and All Hardware
+ $1075.00
NX 200-600Hp Shark Nozzle 2nd System Installed
+ $1795.00
POWER MASTER Made in the USA Starter, Ultra SFI Flex-Plate,  ARP Flex-Bolt Kit
+ $ 375.00

Dyno Tested and Tuned  Using C 23 • Vacuum Pump • HP Corrected to Sea Level

Some Components Subject to Change Due to Availability with Prior Notice Only. Free Freight Applies to this Advertised Item Shipped to a Commercial Address or Freight Terminal in the 48 States. Residential, Out of Area or Lift Gate Service Subject to Additional Charges. Requested Added Insurance or any Handling Fees Apply.

Comments are closed.