BBC 632ci 1800 Hp Nitrous Engine

BBC 632ci 1800 Hp Nitrous Engine

$26,975.00

4.600″ Bore | 4.750″ Stroke | 6.700″ Rods | 1800HP @ 7000 rpm with 750 HP Tune Up

Actual Dyno of 2 stage 632

Components

  • WORLD IV Splayed Cap 100% CNC Race Prepped Block
  • ARP Head and Inner Valley Stud Kit Plate Honed with Block
  • ORING Block and Install .041″ Stainless Steel Wire
  • COATED Cam Bearings and STAINLESS Steel Freeze Plugs
  • CALLIES Magnum Series Internally Balanced Crank
  • CALLIES ULTRA Series I Beam Rods with L19 Rod Bolts
  • KING Race Series Main and Rod Bearings
  • JE or WISECO Gas Ported Coated Skirt Pistons
  • JE 9310 Tool Steel .240″ Thick Wall Wrist Pins
  • TOTAL SEAL SS, TNT or Hell Fire .043/.043/3.0 mm Rings
  • COMPETITION CAM  7/4  Swap .800″ NOS Steel Billet Cam
  • ISKY EXTREME ZONE EZ-ROLLMAX .904″ BUSHED Lifters
  • ROLLMASTER Billet Timing Set, IWIS Chain, Torrington Bearing
  • CLOYES 9-231 2 Piece Timing Cover with Internal Cam Button
  • ATI Super Dampener and Billet TDC Pointer
  • BRODIX HEAD HUNTER MC 395cc 100% CNC Ported Heads
  • BRODIX 2.400 SS and Enconel Exhaust Valves
  • PACALOY RACING 1258 Triple Springs and Titanium Retainers
  • SCE Copper Head Gaskets and Receiver Grooved Heads
  • TREND 7/16 x .165″ Taper-wall Push Rods
  • JESEL or T&D Shaft Rocker System
  • AwesomeEngines® CNC Logo Powder Coated Valve Covers
  • MOROSO Billet Aluminum 22163 Oil Pump
  • MOROSO 20385 Pro Eliminator Steel 7 qt. Capacity Kick Out Oil Pan
  • Moroso 4 Vain Vacuum Pump Complete System
  • BRODIX BM2017 CNC Match Ported Intake and Jomar Spacer
  • HOLLY ULTRA or QFT 1450 cfm NOS Carburetor
  • MSD 84697 Distributor, Crank Trigger, 8.5 mm Wires, NGK Plugs
  • NITROUS EXPRESS RNC 300-750Hp Plate System
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

DART BIG M PRO +.600 54 mm Raised Cam Race Block, Wide Oil Pan, STEEL BILLET Main Caps
+ $ 875.00
BRODIX or DART Aluminum Block 100% CNC Race Prepped with Special Stud Kit
+ $3995.00
Callies XL Series Lightweight NO Drill Internally Balanced Crank (heavy metal included)
+ $1295.00
GRP Billet Aluminum Pro Mod Rods Installed (additional clearance is required)
+ $ 275.00
PRECISION .300 x .250 Taper-wall Wrist Pins (required for 2 stages and will need 3 pieces of heavy metal which are included)
+ $ 295.00
Titanium Intake Valves and Copper Beryllium Valve Seats Installed
+ $ 995.00
NX 200-600Hp NOS Shark Nozzle System Complete 2nd Stage System Installed (Precision .300 x .250″ wrist pins included)
+ $1795.00

Dyno Tested and Tuned Using C23 • Vacuum Pump • HP Corrected to Sea Level

Comments are closed.