BBC 632ci Magnum Short Block

632ci Big Block Chevy Magnum Short Block


THIS 632ci MAGNUM SHORT BLOCK IS THE BEST BUILT HANDS DOWN and uses a DART BIG M PRO Steel Billet Splayed Cap, Raised 54 mm Cam, Coated Cam Bearings, Wide Oil Pan Rail Block as the base, a ($950 option), CALLIES Magnum Crank Cam Cut for a 6.700 Rod, a ($1445 Option), Heavy Metal is 4 Large Slugs, a (125.00 per slug has to be used and is $500 just for Balancing), OLIVER 6.535″ Steel I Beam Rods with L19 Rod Bolts a ($1070 option), JE or WISECO Quick 8 Big Chief or Quick 16 Pistons, a ($195 option), Tool Steel Pins, a ($225 option), TOTAL SEAL TNT 043/043/3.0 mm Rings, a ($175 option), to bring my competitors not as good short block to well over $10,000.00. My No Hassle Open Pricing is Best

DART BIG M PRO 10.200 x 4.600″ Bore 100% CNC 4 AXIS Perfectly Blue Print Machined Block with Steel Billet Splayed Caps • DART Coated Cam Bearings, Brass Freeze Plugs • Professionally Assembled with the Rotator Listed Below; This short block requires a .041″ Cometic or FEL PRO MLS Head Gasket Set with STD Intake Gaskets for Bolt Together, No Hassle Assembly

CALLIES Magnum Internally Balanced U.S.A 4.750″ Steel Crank ­ ­• OLIVER Steel I Beam 6.700″ Rods with L19 Rod Bolts• JE or WISECO 15:1 Quick 16 or Quick 8 Big Chief 18°-14°or 12° Gas Ported Coated Skirt Pro Series Pistons • .180″ Wall Steel Pins • TOTAL SEAL TNT 043-043-3mm Rings • King “H” Main and Rod Bearings • Double Lip Rear Main Seal


DART BIG M RACE SERIES Raised .400″Cam, .842″ Lifter Aluminum Block 100% CNC Race Prepped on our Centroid 4 Axis Block Machining Center
+ $3975.00
Brodix Raised 55 mm Cam, .904″ Lifter Aluminum Block 100% CNC Race Prepped on our Centroid 4 Axis Block Machining Center
+ $4675.00
Callies Magnum XL 4340 Internally NO DRILL Balanced 65lb. Crank Shaft w/2.200 Rod Journal, Heavy Metal Included
+ $1675.00
CALLIES Ultra Series I Beam Billet Rods with L19 Bolts
+ $ 395.00
Total Seal Tool Steel Extreme Duty .043 Piston Rings
+ $ 225.00
JE Tool Steel .240″ Wall Wrist Pins (will require 2 more heavy metal slugs $95 per slug)
+ $ 180.00
54 mm Camshaft Kit Below
+ $ 675.00
Deluxe Short Block Kit Below
+ $1975.00
Cometic or Fel Pro MLS .071″ x 4.630″ Head Gaskets (pair only)
+ $ 225.00
ARP Head Stud Kit Used For Plate Honing For Your Heads (from)
+ $ 275.00
Dart Inner Valley Stud Kit
+ $ 90.00

54 mm Cam Shaft Kit

  1. COMPETITION CAMS .850″ Lift Drag Race Roller Camshaft Installed
  2. ROLLMASTER Timing Set with IWIS Chain and Torrington Roller Bearing
  3. Degree Camshaft to the Proper Intake Valve Opening Event
  4. COMPETITION CAMS Roller Bearing Button and Lock Plate Kit Installed

Deluxe Short Block Kit

  1. 54 mm Cam Kit Listed Above
  2. Raised Cam Aluminum Timing Cover
  3. Billet TDC Timing Pointer TDC Verified
  4. ATI Super Damper is now Standard in Deluxe Kit
  5. Moroso Oil Pump and Proper Pick Up Tube Kit For Pan
  6. Moroso Aluminum Pro Eliminator 7 Quart Drag Race Oil Pan
  7. Timing Cover and Metal Front Seal, Oil Pan Gaskets Installed
  8. Deluxe Short Block Kit Oil Pump Primed to Verify Correct Oil Pressure

Short Blocks Come with Blue Print and Balance Sheet, Product Info, Stickers and Contingency Information

Some Components May Be Subject To Change of Equal Value Due To Availability. Free Freight Applies up to $200 on This Advertised Item Shipped To A Commercial Address or The UPS Terminal Closest To Your Zip Code For Pickup In The 48 States. Any Charges Over $200, Residential, Out-Of-Area, Lift Gate Service, Difficult Handling Fees, Extra Insurance, Apply If Requested.

Comments are closed.