Ford 408ci 475 Hp Street Heat Crate Engine

 

Actual engines may vary from pictures

Ford 408ci 475+Hp Street Heat Crate Engine

$7,599.00

Components

  • AwesomeEngines® Reconditioned Ford 351W 2 Bolt Main Block
  • ARP Main Stud Kit and 12 Point Head Stud Kit
  • Brass Freeze Plug Kit
  • Scat 4.000″ Externally Balanced 9000 Series Crank
  • Scat 6.000″ I-Beam Steel Rods with ARP 2000 Rod Bolts
  • King Performance Main and Rod Bearing Set
  • JE or Wiseco Forged Pistons 10:1
  • JE or Wiseco Plasma Moly Ring Set
  • Comp Cams Magnum Hydraulic Flat Tappet Camshaft
  • Heavy Duty Double Roller Timing Set
  • TCF302 New Aluminum Timing Cover
  • Com Cams Hydraulic Flat Tappet HP Lifters
  • 28oz. Externally Balanced Flexplate and Harmonic Damper

  • Bracket 190cc Aluminum Heads (these are not speedmaster)
  • 2.020/1.600″ Stainless Steel Valves
  • Hydraulic Springs and Retainers
  • Complete Hi-Performance Racing Gasket Set
  • Manley .120″ Wall Push Rods
  • Competition Cams 1.6 Roller Rockers
  • AwesomeEngines® Chrome Valve Covers
  • M83 Oil Pump with Proper Pickup Assembly
  • Stock Chassis 5qt Oil Pan for Any Application
  • Professional Series Air Gap Aluminum Dual Plane Intake Manifold
  • Holley Avenger 770 cfm 4150 Carburetor
  • Pro Billet Distributor, Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight

Available Upgrades

RaceMaster Splayed Cap Race Block Fully CNC Race Prepped on Our Centroid 4 Axis Block CNC Machining Center
+ $1095.00
402ci SBF Dart #31365135 SHP Splayed Cap Race Block Fully CNC Race Prepped on Our Centroid 4 Axis Block CNC Machining Center
+ $1495.00
427ci SBF Dart #31365235 SHP Splayed Cap Race Block Fully CNC Race Prepped on Our Centroid 4 Axis Block CNC Machining Center
+ $1595.00
RaceMaster 100% Fully CNC Ported 210cc Aluminum Heads
+ $ 595.00
AFR #1399 165cc/58cc 1.900/1.600 100% Fully CNC Ported Aluminum Cylinder Heads
+ $ 995.00
AFR #1388 185cc/58cc 2.020/1.600 100% Fully CNC Ported Aluminum Cylinder Heads
+ $ 995.00
Pro Street 408ci/500 Hp: Comp Cams Hydraulic Roller Cam Kit, 210cc 100% CNC Ported Heads, Edelbrock Air Gap RPM, 750cfm Holley Carb and 1¼” Spacer
+ $ 995.00
Maxx Pro Street 427ci/600 Hp: Comp Cams Solid Roller, AFR 1388-185cc/58cc Fully CNC Ported Heads, Victor JR Intake, 850cfm Double Pumper and Spacer
+ $1995.00
Pro Series Main Cap CNC Stud Girdle Installed (needed for stock block upgraded hp versions only)
+ $ 350.00
K1 4340 Internally Balanced Steel Crank and K1 Steel Billet 4340 H-Beam Steel Rods with ARP 2000 Rod Bolts
+ $ 895.00
Comp Cams Hydraulic Roller Cam and ERSON Roller Lifter Package for Ultimate Torque and Power
+ $ 495.00
Moroso or Canton 7qt Front or Rear Sump Oil Pan for Your Chassis Application
+ $ 295.00
MSD Billet Ready to Run Hi-Performance Distributor
+ $ 325.00

Dyno Tested & Tuned Using Exxon 93° Pump Gas • Vacuum Pump • HP Corrected to Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or the UPS Terminal Closest to Your Zip Code for Pickup in the 48 States

Comments are closed.