Ford 598ci 1000 Hp Bullet Engine

Ford 598ci 1000 Hp Bullet Engine

$19,475.00

10.300″ Deck | 4.600″ Bore | 4.500″ Stroke | 6.800″ Rods | 1000hp @ 7200rpm

Components

  • ULTRA Eliminator Splayed Cap 100% CNC Race Prepped Block
  • ARP 12 Point Head Stud Kit Plate Honed with Block
  • EAGLE Internally Balanced 4340 Steel Crank
  • K1 Steel Billet H-Beam Rods with ARP 2000 Bolts
  • KING Race Series Main and Rod Bearings
  • JE or WISECO 14.5:1 Pistons w/.043/.043/3mm (8-14:1 ava)
  • JE or WISECO Tool Steel .180″ Thick Wall Wrist Pins
  • TOTAL SEAL Stainless Steel Piston Rings
  • COMPETITION CAMS .800″ Solid Roller Camshaft
  • COMPETITION CAMS HIPPO Solid Roller Lifters
  • CLOYES Billet True Roller Timing Set
  • NEW FRONT Timing Cover Assembly
  • ATI Billet TDC Verified Pointer
  • ATI Super Damper (best in the business)
  • TFS-5451T804-C03 Fully CNC Ported 360cc Heads
  • TFS 2.400/1.88 Intake and Exhaust Steel Valves
  • PAC RACING Triple Springs and Titanium Retainers
  • FEL PRO Racing Head Gaskets
  • MANLEY or TREND 3/8 x .135″ Wall Push Rods
  • COMPETITION CAMS Magnum Series Rockers, TFS Stud Girdle
  • AWESOMEENGINES® Ford Motor-Sport Valve Covers
  • MELLING M84HDV Oil Pump Kit
  • MOROSO 8 Qt. Capacity Stroker Oil Pan
  • TFS 5440011 100% CNC Match Ported Intake Manifold
  • JOMAR Special CNC Ported Spacer
  • HOLLEY or QFT 1250 cfm FX Carburetor
  • MSD Billet Dist, 8.5mm Spark Plug Wires and NGK Plugs
  • AWESOMEENGINES® Free 48 State Freight

Available Upgrades

SCAT 4340 Steel Billet Crank Shaft
+ $1975.00
OLIVER Steel I Beam Rods with L19 Rod Bolts
+ $ 975.00
CALLIES Ultra I Beam Rods with L19 Rod Bolts
+ $1175.00
JESEL or T&D Shaft Rocker System Installed
+ $1275.00
TREND Taper-wall 7/16″ Severe Duty Push Rods
+ $ 275.00
COMETIC MLS Head Gaskets
+ $ 175.00
MOROSO Complete Vacuum Pump System Installed
+ $1075.00
TFS A460 Tunnel Ram 5449400 Intake Manifold 1040+Hp w/2×4 Carbs and Linkage
+ $1975.00
MSD Crank Trigger System, Required with Tunnel Ram Option
+ $ 375.00
FULL Port Either Intake Manifold
+ $ 675.00
TERMINATOR Fuel Injection Installed, Dyno Tested and Tuned for a Bolt in Ready to Go Engine
+ $1975.00

Dyno Tested and Tuned with 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Some Components May Be Subject To Change of Equal Value Due To Availability. Free Freight Applies To This Advertised Item Shipped To A Commercial Address Or The UPS Terminal Closest To Your Zip Code For Pickup In The 48 States. Residential, Out-Of-Area, Lift Gate Service Subject To Additional Charges. Insurance and Handling Fees Apply If Requested.

Comments are closed.