Ford 638ci 1060 Hp Bullet Engine

Ford 638ci 1060 Hp Bullet Engine

$20,999.00

10.300″ Deck | 4.700″ Bore | 4.600″ Stroke | 6.700″ Rods | 1060Hp @ 7200 RPM

Components

  • TFS 360cc A460 13.5/10.5° Aluminum Fully 100% CNC Ported Heads
  • TFS 2.400/1.88 Severe Duty Stainless Steel Valves
  • PAC RACING Triple  Springs and Titanium Retainers
  • FEL PRO Racing Head Gaskets
  • MANLEY or TREND 3/8 x .135″ Wall Push Rods
  • JESEL or T&D 1.7/1.7 Pro Series Shaft Rocker System
  • AWESOMEENGINES® Custom Valve Covers
  • MELLING M84HDV Oil Pump Kit
  • MOROSO 8 Qt. Capacity Stroker Oil Pan
  • TFS 4500 1×4 100% CNC Match Ported Intake
  • JOMAR Special CNC Ported Spacer
  • HOLLEY or QFT 1450 cfm FX Series Carburetor
  • MSD Pro Series Billet Race Distributor, Wires, NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

FORD Motor-Sport Aluminum Block with Billet Steel Caps and Special Head Stud Kit
+ $4975.00
SCAT Steel Billet 4340 Internally Balanced Crank Shaft
+ $1975.00
OLIVER I Beam Steel Rods with L19 Rod Bolts
+ $ 975.00
CALLIES Ultra I Beam Rods with L19 Rod Bolts
+ $1175.00
TOTAL SEAL Tool Steel Extreme Duty Piston Rings
+ $ 275.00
JE or WISECO Tool Steel .220″ Wall Wrist Pins
+ $1495.00
JESEL Belt Drive System Installed
+ $1475.00
TREND 7/16 x .165″ Taper Wall Push Rods
+ $ 275.00
MSD Crank Trigger System Required w/Tunnel Ram Option
+ $325.00
MOROSO Complete Vacuum Pump System Installed
+ $1075.00
TFS Tunnel Ram 2×4 Intake Manifold, Second Carb, Linkage (over 1100hp combination using air pump and crank trigger)
+ $1975.00

Dyno Tested and Tuned with 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Some Components May Be Subject To Change of Equal Value Due To Availability. Free Freight Applies To This Advertised Item Shipped To A Commercial Address Or The UPS Terminal Closest To Your Zip Code For Pickup In The 48 States. Residential, Out-Of-Area, Lift Gate Service Subject To Additional Charges. Insurance and Handling Fees Apply If Requested.

Comments are closed.