Pontiac 461ci 525 Ftlb Street Heat Crate Engine

Pontiac 461 ci 525 Ftlb Street Heat Crate Engine

100% CNC Race Prepped Dead On 400 Block with a Finished Bore of .030 or .060″ over, Internally Balanced 4.250 Stroker Rotator with Forged Pistons, I Beam Rods, Plasma Moly Rings, Bearings as well as every component in the Pontiac steel heads that are 100% race prepped like new; assembled, Dyno Tested and Tuned and nothing but the block and bare heads are reconditioned with all other new parts

$6,975.00

http://www.youtube.com/watch?v=-z8-gGh8wkY

10.230″ Deck | 4.155″ Bore | 4.250″ Stroke | 6.800″ Rods | 525 lb 4400 rpm-500 Hp @ 4600 rpm

Components

  • Pontiac 100% CNC Race Prepped Customers 400 Block to 4.155 Bore 
  • ARP Head Bolt Kit
  • Brass Freeze Plug Kit
  • Eagle #52401 4.250″ Cast Int/Bal Crank I Beam and Mahle Forged Rotator
  • Mahle -22cc Pistons with Eagle I Beam Steel Rods with ARP Rod Bolts
  • Clevite or King Bearings
  • Mahle 10.5:1 Forged Pistons
  • File to Fit Plasma Moly Rings
  • Competition Cams #51-234 Magnum Hydraulic Flat Tappet Cam
  • Competition Cams #852-16 Magnum Hydraulic Flat Tappet Lifters
  • Competition Cams #2112 Double Roller Timing Kit
  • New Aluminum Timing Cover and Kit
  • New Internally Balanced Damper

  • Customers Pontiac Heads with all Brand New Components for Unleaded Fuel
  • 2.110″ Intake, 1.770″ Exhaust Stainless Steel Valves
  • 1.437  Springs and 10° Steel Retainers
  • Hi-Performance Fel Pro Engine Gaskets, Viton Rubber 2 Piece Rear Seal
  • Manley .120″ Thick Wall Push Rods
  • Competition Cams #1451-16 Roller Tip Rocker Arms
  • Melling M54DS HP Oil Pump and Proper Pickup Tube
  • Moroso Stroker 7qt. Race Oil Pan with Baffling
  • Pontiac Short or Tall Valve Covers with Baffles
  • Edelbrock Performer RPM Air Gap Intake Manifold
  • Holley Avenger or QFT Brawler 850 cfm Carburetor Dyno Tuned
  • MSD Ready to Run Distributor, Coil, 8.5 mm Wires and NGK Plugs
  • Dyno Tested and Tuned to Perfection, Boxed and Ready to Ship

OPTIONS

MR1 Steel Billet Main Cap Race Block, 100% CNC Race Prepped Best Block in the Business, a 4.350″ Stroke and  4.400″ Bore is a 529 ci Engine
+ $3975.00
Eagle #51520 4.350″ Int/Bal 4.350 4340 Steel Crankshaft Stroker 471.8 ci Kit, H Beam 4340 Rods and -6cc Carrillo Forged Pistons and Clearance Block
+ $1275.00
Competition Cams #51-309-4 Hydraulic Roller Cam, Lifters, Roller Tip Rockers, Springs, Retainers, Push Rod Package (Pro Street Kit)
+ $ 775.00
ATI SFI Steel Super Damper and SFI Heavy Duty Flexplate with ARP Bolts
+ $ 575.00
Jesel or T&D Shaft Rocker System Installed
+ $1175.00
Edelbrock Performer RPM D-Port #61575 204 cc Intake Runner with 87cc Combustion Chamber Aluminum Cylinder Heads
+ $1975.00
Edelbrock Performer RPM D-Port 100% CNC Ported Cylinder Heads
+ $2975.00
Edelbrock Performer RPM Intake Manifold
+ $ 375.00
Edelbrock 100% CNC Ported Victor Cylinder Heads and Match Ported Victor Manifold
+ $3675.00
Edelbrock CNC Match Ported Victor Series Intake Manifold
+ $ 595.00
MSD Pro Billet Distributor, MSD 6AL Box, MSD Coil, Complete Kit Dyno Tested & Tuned with Engine
+ $ 450.00

Dyno Tested & Tuned with 93° Exxon • Vacuum Pump • HP Corrected To Sea Level

Free Freight of $300 Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar