Pontiac 468ci 500 Hp Street Heat Crate Engine

Pontiac 468ci 500 Hp Street Heat Crate Engine

100% CNC Race Prepped Dead On Block, Bored .030 – .040 Over, Internally Balanced 4.250 Stroker Rotator with Forged Pistons, House Race Prepped with All New Components in the Pontiac Fully Race Prepped Steel Heads; Assembled, Dyno Tested and Tuned.

$5,975.00

http://www.youtube.com/watch?v=-z8-gGh8wkY

Components

  • PONTIAC 100% CNC Race Prepped Block 4.155″ to 4.185″ Bore
  • ARP Head Bolt or Stud Kit
  • BRASS Freeze Plug Kit
  • EAGLE or SCAT 4.250″ Internally Balanced Cast Steel Crank
  • EAGLE or SCAT 6.800″ I Beam 4340 Steel Rods
  • CLEVITE or KING Cam, Main and Rod Bearings
  • CARRILLO , JE, MAHLE or WISECO 10.5:1 Forged Pistons
  • TOTAL SEAL File to Fit Plasma Moly Rings
  • COMPETITION CAMS #51-234 Magnum Hydraulic Flat Tappet Cam
  • COMPETITION CAMS #852-16 Magnum Hydraulic Flat Tappet Lifters
  • COMPETITION CAMS #2112 Double Roller Timing Kit
  • BUTLER New Aluminum Timing Cover and Kit
  • NEW Internally Balanced Damper
  • PONTIAC Heads with all Brand New Components for Unleaded Fuel
  • 2.110″ Intake, 1.770″ Exhaust Stainless Steel Valves
  • 1.437  Springs and 10° Steel Retainers
  • HI-PERFORMANCE Engine Gaskets, Viton Rubber 2pc Butler Rear Seal
  • MANLEY .120″ Thick Wall Push Rods
  • COMPETITION CAMS #1451-16 Roller Tip Rocker Arms
  • MELLING M54DS HP Oil Pump and Proper Pickup Tube
  • MOROSO Stroker 7qt. Race Oil Pan with Baffling
  • Short or Tall Chrome Valve Covers with Baffle for PCV
  • EDELBROCK Performer RPM Air Gap Intake Manifold
  • HOLLEY or QFT 850 cfm Carburetor Dyno Tuned
  • HEI Distributor, 8.5 mm Wires and NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

AwesomeEngines® 100% CNC Race Prepped MR1 Iron Race Block with Steel Billet Main Caps, 4.400″ Bore Pistons for 517ci if Requested
+ $2475.00
472ci EAGLE 4.350″ Internally Balanced 4340 Steel Crankshaft, H Beam 4340 Rods and Carrillo Stroker Pistons
+ $1475.00
COMPETITION CAMS #51-309-4 Hydraulic Roller Cam, Lifters, Roller Rockers, Springs, Retainers, Push Rod Package (Pro Street Kit)
+ $ 775.00
ATI SFI Steel Super Damper and SFI Heavy Duty Flexplate w/ARP Bolts
+ $ 575.00
JESEL or T&D Shaft Rocker System Installed
+ $1175.00
EDELBROCK RPM 61575 204 cc / 87cc Aluminum Cylinder Heads
+ $2475.00
EDELBROCK 100% CNC Ported Performer Cylinder Heads
+ $1075.00
EDELBROCK Performer RPM Intake Manifold
+ $ 375.00
EDELBROCK 100% CNC Ported Victor Cylinder Heads and Match Ported Victor Manifold
+ $3475.00
EDELBROCK Victor Series Intake Manifold
+ $ 395.00
MSD Pro Billet Distributor, MSD 6AL Box, MSD Proper Coil, Complete Kit Dyno Tested with Engine
+ $ 775.00
FiTech EFI 3×2 Tri Power Complete System with Intake Manifold, Fuel Pressure Regulator Dyno Tested and Tuned
+ $2495.00

Dyno Tested and Tuned with 91° Fuel • Vacuum Pump • HP Corrected To Sea Level

Some Components May Be Subject To Change of Equal Value Due To Availability. Free Freight Applies To All Advertised Items Shipped To A Commercial Address Or The UPS Terminal Closest To Your Zip Code For Pickup In The 48 States. Residential, Out-Of-Area, Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Apply If Requested.

Comments are closed.