Pontiac 495ci 650 Hp Pro Street Crate Engine

Pontiac 495ci 650 Hp Pro Street Crate Engine

100% CNC Race Prepped Dead On Pontiac Block Bored .030″. 040″ or .060″ Over, Internally Balanced 4.500 Stroker Rotator with Forged Pistons, House Race Prepped with all New Components Listed Below for a Killer Pro Street Pontiac Crate Engine



  • Pontiac 100% Race Prepped Block 4.155″, 4.165″, or 4.185″ Bore
  • ARP Head Stud Kit Plate Honed with Block
  • Brass Freeze Plug Kit
  • Eagle or Scat 4.500″ Internally Balanced 4340 Steel Crank
  • Eagle or Scat 6.800″ H-Beam 4340 Steel Rods
  • King Race Series Main and Rod Bearings
  • Carrillo, JE, Mahle or Wiseco 10.5:1 Dish Top Forged Pistons
  • Total Seal Plasma Moly Hi-Performance Rings
  • Competition Cams Magnum Hydraulic or Solid Roller Cam
  • New Aluminum Timing Cover and Complete Install Kit
  • Competition Cams Hydraulic or Solid Roller Lifters
  • Competition Cams Double Roller Timing Set
  • ATI New Internally Balanced Damper

  • Edelbrock RPM 204 cc / 87 cc Aluminum Street Ported Heads
  • 2.110″ Intake, 1.660″ Exhaust Stainless Steel Valves
  • 1.437 Hyd Roller Springs with 10° Steel Retainers
  • Fel Pro Hi-Performance Engine Gasket Kit with Butler Viton Rear Seal
  • Manley 3/8″ x .135″ Thick Wall Racing Push Rods
  • Comp Cams 1.6 Gold Series Roller Rocker Arms
  • AwesomeEngines® CNC Engraved Tall Aluminum Valve Covers
  • Melling M54DS Oil Pump and Proper Pickup Tube
  • Moroso Stroker 7qt. Capacity Race Oil Pan with Baffling
  • Edelbrock RPM or Victor Intake Manifold
  • Holley or QFT 950cfm Dyno Tested and Tuned Carburetor
  • MSD Billet Distributor, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

MR1 Iron Block with Steel Billet Splayed 4 Bolt Caps 100% CNC Race Prepped Block
+ $2475.00
MR1A Aluminum Block with Special Head Stud Kit Plate Honed Specifically Light Weight 100% CNC Race Prepped Block
+ $3975.00
578ci 4.400″ Bore and 4¾” Internally Balanced 4340 Steel Crankshaft for the Maxx Stroker Kit Engine for Either MR1 Block Radial Cleared
+ $1575.00
Oliver I Beam 6.800″ Steel Rods with L19 Rod Bolts
+ $1075.00
Callies Ultra Series I Beam Rods with L19 Rod Bolts
+ $1275.00
Titanium 10° Retainers
+ $ 175.00
SFI Heavy Duty Flexplate and ARP Bolts
+ $ 175.00
JESEL or T&D Shaft Rocker System Installed
+ $1275.00
Fully CNC Ported Edelbrock Aluminum Cylinder Heads
+ $1075.00
Fully CNC Match Ported Edelbrock Intake Manifold
+ $ 375.00

Dyno Tested and Tuned with 93° Fuel • Vacuum Pump • HP Corrected To Sea Level

Some Components May Be Subject To Change of Equal Value Due To Availability. Free Freight Applies To All Advertised Items Shipped To A Commercial Address Or The UPS Terminal Closest To Your Zip Code For Pickup In The 48 States. Residential, Out-Of-Area, Lift Gate Service Subject To Additional Charges. Insurance & Handling Fees Apply If Requested.

Comments are closed.