SBC 440ci 1400 Hp Nitrous Race Engine

SBC 440ci 1400 Hp Nitrous Race Engine


9.000″ Deck | 4.185″ Bore | 4.000″ Stroke | 6.000″ Rods | 1150lbs and 1400 Hp @ 7000 rpm

  • DART IRON EAGLE Raised 50mm Cam, Steel Billet Cap Race Block
  • STAINLESS STEEL Oring Installed in the Block
  • DART 50MM Coated Cam Bearings Installed
  • ARP Head Stud Kit Plate Honed with the Block
  • CALLIES or CROWER USA 4340 Internally Balanced Crank
  • CALLIES 4330V Ultra I Beam Rods with L19 Bolts
  • CLEVITE or KING HP Race Main and Rod Bearings
  • JE or WISECO Nitrous 2618 Forged Pistons and .220″ Wall Pins
  • TOTAL SEAL SS, TNT or Hell Fire Ring Package
  • COMPETITION CAMS .750″ Lift Steel Billet 7/4 Swap Nitrous Cam
  • CLOYES True Roller Timing Set with Torrington
  • CLOYES EZ Adjust 2 Piece Solid Aluminum Front Timing Cover
  • ISKY Extreme Zone™ EZ-RollMAX™ Roller Lifters
  • ATI Super Damper and Billet TDC Pointer
  • BRODIX 13°-1238100 or DART 12.5°-14482131 100% CNC Ported Heads
  • BRODIX 218/1625 or DART 218/1600″ Stainless Steel Valves
  • PAC RACING Roller Springs and Titanium Retainers
  • SCE Copper Gaskets with Oring and Receiver Groove
  • TREND 7/16 x .165″ Taper Wall Push Rods
  • JESEL or T&D Shaft Rocker System
  • AwesomeEngines® CNC Engraved Sheet Metal Covers
  • MOROSO Oil Pump Complete Install Kit
  • MOROSO Steel Pro Eliminator Oil Pan
  • BRODIX or DART CNC Match Ported Intake Manifold
  • Holley or QFT 1050cfm NOS Carburetor
  • NX Shark 200-600Hp Kit with L250 Low Amp Solenoids
  • MSD Black Distributor, Crank Trigger, 8.5″ mm Wires, NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Brodix or Dart 31712212 Aluminum Lightweight Block and Special ARP Head Stud Kit
+ $3695.00
Callies XL Series Lightweight No Drill Balance Crank Shaft (heavy metal is included for balance job)
+ $ 795.00
BILL MILLER or GRP Billet Aluminum Connecting Rods (clearance included)
+ $ 295.00
Brodix Symmetrical Port BD2300 2.230/1.600 2.2/1.58 Cylinder Head and BM102 CNC Ported Intake
+ $3295.00
Titanium Intake Valves
+ $895.00
Enconel Exhaust Valves
+ $ 295.00
Moroso Vacuum Pump System, Pump Mounted Relief Valve and Billet Can Completely Installed and Dyno Tested and Tuned with Engine
+ $1095.00
Jesel Belt Drive System
+ $1295.00
Nitrous Express #63870-10 2 Stage RNC 750Hp Plate System, L250 Solenoids Completely Installed (E85-ava)
+ $1395.00
Rons Terminator Injection System Installed and Dyno Tuned
+ $1995.00

Dyno Tested and Tuned Using C23 Race Fuel • HP Corrected to Sea Level

Free Freight Applies To This Item Shipped To A Commercial Address Or The UPS Terminal Closest To Your Zip Code For Pickup In The 48 States

Comments are closed.