SBC 462ci 720 Hp Pro Street Crate Engine

SBC 462ci 720 Hp Pro Street Crate Engine

This Pro Street Race Engine is built with a DART Iron Eagle raised cam Race Block machined with our 4 Axis cnc Block machining Center. Near dead on specifications within .0002″, blue print bore centers, perfect 45° bank angles, perfect ring seal and dead on compression for every cylinder helps produce the most possible power for the engine. Assembled to perfection, dyno tested and tuned ready.


9.325″ Deck | 4.155″ Bore | 4.250″ Stroke | 6.200″ Rods | 700HP @ 6600 rpm

See Actual Video with Dyno Pull

Actual Components Included w/Purchase

  • DART IRON EAGLE 9.325″ Steel Billet Cap 100% CNC Machined Block
  • CALLIES Magnum” Internally Balanced 4340 Steel Crank
  • K1 Steel Billet or Manley 6.200″ H-Beam 4340 Rods, ARP 2000 Rod Bolts
  • JE or WISECO 10.9:1 Forged Top 2618 Pistons
  • TOTAL SEAL Plasma Moly File To Fit Ring Set
  • CLEVITE or KING Race Series Main and Rod Bearings
  • POLISHED Aluminum Timing Cover, TDC Billet Pointer
  • MOROSO Oil Pump , Pick up Tube, Shaft and Bolt Kit
  • MOROSO 20193 IRON EAGLE WIDE Stroker 7qt. Oil Pan
  • PRW SFI Internally Balanced New Street Damper
  • MSD Pro Billet Distributor, Wires, NGK Plugs
  • DART Block Kit with Coated BBC Cam Bearings and Brass Freeze Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)
  • AFR 227c Competition 100% CNC Ported Aluminum Heads 329/245af
  • AFR 2.100-1.600″ Stainless Steel Valves
  • PAC RACING .710″ Lift Springs and Titanium Retainers
  • COMETIC or FEL PRO MLS Head Gaskets
  • ARP Head Stud Kit Plate Honed to Your Block
  • COMPETITION CAMS 7/4 Swap Steel Billet Roller Camshaft
  • COMPETITION CAMS “HIPPO” Solid Roller Lifters
  • CLOYES Billet Roller Timing Set with Torrington Bearing
  • MANLEY 3/8 x .135″ Wall Chrome Moly Push Rods
  • Harland Sharp +.050″ Offset Roller Rockers and 6208 Stud Girdle
  • DART CNC Match Ported Single Plane Intake
  • HOLLEY or QFT 1050 cfm Dyno Tuned Carburetor
  • AwesomeEngines® CNC Engraved Aluminum Valve Covers

Available Upgrades

ATI Made in the U.S.A. Super Damper Specific Honed to the Crank Snout
+ $ 250.00
COMPETITION CAMS or ERSON Hydraulic Roller Cam Kit (cam, lifters, springs, retainers)
+ No Charge
JESEL or T&D Pro Series Shaft Rocker
+ $1075.00
JESEL Raised Cam Billet Belt Drive System Installed
+ $ 1275.00
+ $ 575.00
+ $ 975.00
Trend Taper Wall 7/16 Chrome Moly Push Rods with Shaft Rockers Only (requires a lot of clearance work)
+ $ 275.00
MOROSO 22164 Billet Aluminum Oil Pump Kit
+ $ 275.00
AFR 245cc Cylinder Heads with JESEL .450″ Offset Rockers and 7/16 Trend Push Rods Push This Engine to Almost 775HP
+ $1575.00
Complete Holley or Fast EFI up to 1200 Hp Fast Fuel Injection System Installed, Dyno Tested and Tuned
+ $1995.00
BRODIX, or DART Aluminum Block and Special Head Stud Kit
+ $3995.00
CALLIES Ultra I Beam Rods with L19 Rod Bolts
+ $1075.00
Awesome Engines CNC Engraved Logo Your Color Powder Coated Covers with Billet Oil Fill, PCV Grommet and Oil Control Baffles
+ $ 250.00

Dyno Tested and Tuned Using 93° Pump Gas • Vacuum Pump • HP Corrected To Sea Level

Some Components May Be Subject To Change of Equal Value Due To Availability. Free Freight Applies To All Advertised Items Shipped To A Commercial Address Or The UPS Terminal Closest To Your Zip Code For Pickup In The 48 States.

Comments are closed.