327ci 330Hp 1965 Engine Special
$5995.00
327ci 330Hp 1965 Correct Number Matching Engine Special out of a 1965 Impala, Convertible A/C Automatic Car, Posi 12 Bolt still all there: Block, Crank, Rods, Oil Pan, Timing Cover, Balancer, Double Hump Heads, Push Rods, Rockers, Distributor, Edelbrock Performer Endurashine Intake, 600cfm Edelbrock Carburetor; CNC Race Prepped block bored to 4.026″, CNC square decked to 9.010″ on perfect 45° bank angles with GM serial # clearly visible, torque plate honed to 4.030″ final bore for 331ci. Hot washed block, New Cam bearings, brass block and all oil galley plugs, all assembled with matching 1965 #461 virgin heads upgraded with valve guides, exhaust seats for unleaded gasoline all with a rolled radius valve job. Painted Chevrolet orange, final assembled with ProForm GM Orange dress up package kit installed.
9.010″ Deck | 4.030″ Bore 331ci | 3.250″ Stroke |5.700″ Rods | 330 Hp @ 5000 rpm
Components
- GM 1965 327 Matching # Reconditioned SJ 2 Bolt Block
- Head Bolt Kit Plate Honed with Block
- GM Matching # Steel Reconditioned SJ Crank Shaft
- GM Matching # 5.7″ SJ Rods Reconditioned with 11/32″ ARP Rod Bolts
- King Main and Rod Bearings
- Sealed Power Forged Stock 9.5:1 Compression Flat Top Pistons
- Sealed Power Chrome Moly Ring Set
- Comp Cams 12-210-2 Advertised Duration 268/268, Lift .454/.454
- Comp Cams or Sealed Power Flat Tappet Hydraulic Lifters
- Double Roller Timing Chain and Gear Set
- GM Timing Cover and TDC Pointer
- GM Harmonic Dampener
- GM 1965 Matching # 461 Double Hump Professionally Prepared
- Valves SS 1.94/1.50″, Guides, Exhaust Seats – (2.02/1.6 available)
- New 1.240″ Springs, Retainer and Lock Kit
- Fel Pro Engine Gasket Rebuild Kit with Steel Shim .019″ Head Gaskets
- Chrome Moly 5/16″ Push Rods
- GM 1.5 Rocker Arms
- GM 60lb Pressure Oil Pump Kit with Welded Pick Up
- GM 5 Quart Oil Pan, Lucas Break in Oil, Gold Napa Filter
- Edelbrock Performer Enduro Shine Intake Manifold (used)
- Edelbrock #1406 600cfm Carburetor, Electric Choke Fresh
- GM Original # Distributor, New Gear, 8.5 mm Wires and NGK Plugs
- AwesomeEngines® Free 48 State Freight
OPTIONS
JE or Wiseco 10.25:1 Forged 10cc Dome Pistons and 360Hp
+ $ 295.00
Comp Cams or Erson Hydraulic Roller Cam, Lifter, Spring and Roller Tip Rocker Valve Train Option Kit
+ $ 895.00
Ready to Run MSD Billet One Wire Distributor, Coil, Coil Bracket
+ $ 395.00