374ci 705Hp SBC NA or Nitrous Engine Special
Dart SHP Splayed Cap Race Block, 4 Axis CNC bored on 4.400″ dead on blueprint bore centers to 4.121″, CNC Perfect 4.4″ Bore Centers Oring Block, Receiver Grooved Heads for Copper gaskets, CNC square decked block, ARP Head Stud Kit Plate Honed to Final 4.125″ Bore, 4340 Rotator; Eagle 3.5″ Crank, Lunati Pro Mod Rods , 13:1 Brand New Coated Wiseco NOS Pistons, HNS JE Rings, Dart 230cc 2.800″ 1.600 SD SS Valves NOS prepared cylinder heads, COMP Cams Solid Roller cam and Lifter Combination, Edelbrock Victor Jr. 4150 Pro Form Body Brand New 850 double pumper, MSD Distributor, Wires, Spark plugs, Dyno Tested and Tuned for up to 400hp NOS Shot with proper fuel and timing
$8000.00 SOLD
9.000″ Deck | 4.125″ Bore | 3.500″ Stroke | 705Hp NA@ 7800 rpm 1000Hp NOS
Components
- New Dart SHP Splayed Cap 100% 4 Axis CNC Race Prepped Block
- CNC O-ring Block with Stainless Steel Wire for Copper Head Gaskets
- Fresh Polished Eagle 3½” Internally Balanced 4340 Steel Crank
- Lunati Pro Mod I-Beam 5.700″ Bushed Rods Checked Big End & Bolts
- New Wiseco Forged 13.43:1 Compression Pistons
- New 9310 .200″ Wall Tool Steel Power Adder New Wrist Pins
- New Total Seal CSH4434125 Nitrous Power Adder New Ring Set
- Near Perfect COMP Cams Solid Roller Cam
- COMP Cams +.300″ Hippo Solid Roller Used Lifters
- New Roll Master Billet Double Roller Timing Set
- New Blackout Timing Cover and TDC Pointer
- ATI Near Perfect Internally Balanced Damper TDC Pointer Verified
- Fresh Dart 230cc Steel Heads Receiver Grooved for Oring
- Fresh Dart SS 2.080 1.600″ NOS Valve Job
- Fresh Set up Pac Double Springs, 10° Titanium Retainer & Locks
- SCE New Copper Head Gaskets
- Near Perfect .105″ Wall Chrome Moly Push Rods
- Near Perfect COMP Cams Mangum Series 1.5 Rockers and Stud Girdle
- New AwesomeEngines® Blackout CNC Engraved Sheet Metal Valve Covers
- Melling HP Oil Pump, Moroso Pickup, HD Shaff and Stud Kit Set up for Pan
- Customer Supply’s Oil Pan and Will Send Complete Vacuum Pump
- Customer Supply’s the Intake Manifold
- Customer Supply’s the Injection Unit, Engine Plate and Pump
- Customer Supply’s the Complete Ignition System
OPTIONS
Isky EZ-Roll™ Extreme Duty Helix Bushed Roller Lifters
+ $1295.00
Jesel Pro Series Shaft Rockers System and the very Best Option you could ever add for Valve Train Stability
+ $1295.00
Moroso Vacuum Pump System, Pump Mounted Relief Valve, Vented Catch, AN Fittings, Line, Pulleys and Mandrel Dyno Tested and Tuned with Engine
+ $1375.00
Fogger System Plumbed with Bypass Regulator, Set up with Relays, WOT Switch, 300Hp Hit
+ $1695.00
TCI SFI 168 Tooth Flexplate with ARP 12 Point Fasteners
+ $ 225.00