390ci 500Hp SBC Pro Street Engine Special
390ci 500 Hp SBC Engine Special with a Big Nasty Cam fully Blue Printed and Balanced, assembled then Dyno Tested and Tuned for street driven usage with Plenty of 93 Octane Pump Gas Power. New Items are listed clearly, Block, Crank, Rods, have been machined dead on This engine was traded in because of damage to most pistons with broken ring lands and rings with severe crank case pressure. Plate honed to final 4.040″ with proper pistons for high performance use
$6995.00
9.000″ Deck | 4.040″ Bore | 3.80″ Stroke | 5.700″ Rods | 500 Hp @ 6600 rpm
- Hypereutectic Flat Top 10:1 D-Dish New Pistons, Pins, Locks
- Plasma Moly File to Fit New Rings
- Durabond Cam, King Main, and Rod New Bearings
- Double Roller New Timing Set
- Fel Pro Multi-Layered Steel New Head Gaskets
- 195cc Aluminum New Cylinder Heads 2.02/1.60 SS Valves
- 1.440″ Hydraulic Roller Springs, Chrome Moly 10° Retainer kit
- Head Bolt New Kit Plate Honed with the Block
- Chrome Moly Super Series 1.5 Ratio 7/16 New Roller Rockers
- JEGS New Billet Distributor, 8.5 mm Wires
- NGK New Spark Plugs, New Napa Gold Filter 5qt Lucas Hot Rod 10w30
- GM 4 Bolt Main Block CNC, Decked and Radial Cleared for Big Stoke
- Reground .010 .010 3.800″ 1 Piece Rear Seal GM Stroker Crank Shaft
- Aftermarket 5.7 Full Floating Connecting Rods with ARP Bolts
- Melling 60lb HP Pump, HD Shaft, Pickup, Stud 5qt Pan Kit
- Chrome Moly .080″ x 5/16″ Wall Push Rods
- Black Anodized Sheet Metal Valve Covers and Install Kit
- Hydraulic Pro Street Nasty Roller Camshaft
- GM Hydraulic Roller Lifters Kit
- Edelbrock Victor Jr Intake Manifold
- Fresh Holley 750 cfm Double Pumper Carburetor
- 8″ Internal GM Balancer Damper and TDC Pointer