400ci 1300 Hp SBC Blown Race Engine

400ci 1300HP SBC Blown Race Engine

Injected and Blown engines are a Pro Magnum with all the best internals, 30lbs of boost produces reliable consistent power

$35,975.00

9.000″ Deck | 4.125″ Bore | 3.750″ Stroke | 5.700″ Rods | 1300+Hp @ 7000 rpm with 30 psi

Components

See Actual Engine Being Dyno Tested

See Another Being Tested

  • Dart Iron Eagle Raised .391 Cam Block 100% CNC Race Prepped
  • Dart Coated Cam Bearings and Block Small Parts Kit
  • ARP Head Stud Kit Plate Honed with Block
  • Callies Magnum 4340 Double Key Way BBC Crank Snout
  • GRP Billet Aluminum Pro Mod Rods
  • Clevite or King Racing Main and Rod Bearings
  • JE or Wiseco 2618 Blower Pistons
  • JE ow Wiseco Tool Steel .220″ Wall Pins with Buttons
  • GFX, Total Seal SS, TNT or Hell Fire Rings
  • Comp Cam .750″ Lift 50 mm Roller Camshaft
  • Comp Cams Bushed .904″ Rev Zone Roller Lifters
  • Milodon Gear Drive and Mechanical Front Mounted Pump
  • Blower Hub with Impregnated Crank Trigger Magnets

  • AFR 1140-TI Spread Port 245cc 100% CNC Ported Heads
  • AFR 2.125″ Intake and 1.600″ Inconel Exhaust Valves
  • PAC Racing Roller Springs and Titanium Retainers
  • Trend 7/16 x .165″ Taper Wall Push Rods
  • Jesel Pro Series Shaft Rocker System
  • AwesomeEngines® CNC Engraved Powder Coated Valve Covers
  • Moroso 22171 Billet Oil Pump
  • Moroso Steel Pro Eliminator Oil Pan
  • BDS Competition Polished Intake
  • BDS or Littlefield 8:71 Polished Blower Set Up
  • Enderle Complete Bug Catcher Injection Set Up
  • MSD Pro Billet Distributor, Crank Trigger, 8.5 mm Wires, NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

Dart Hipped 31712213 Aluminum Raised 50 mm Cam Bearing Spread Oil Pan Block with Special Head Stud Kit
+ $3975.00
Brodix Hipped 8B1000 Aluminum Raised 55 mm Cam, .904 Lifter and Special Head Stud Kit
+ $4275.00
Front Mounted blower Support
+ $975.00
Moroso Pro Eliminator Aluminum Kick Out Oil Pan, Windage Tray
+ $375.00
MSD 81307 PRO MAG 44 System
+ $1975.00
871 High Helix Super Charger and 150+Hp
Call
12-13-15- and 18° 100% CNC Ported Heads, Custom Sheet Metal Intake Manifold 200+Hp Capable
CALL

Dyno Tested & Tuned • Crank Trigger • HP Corrected To Sea Level

Free Freight Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar