407ci Pontiac Street Short Block
$3995.00
Pontiac 400ci Block • CNC BluePrint Bored on 4.620″ Bore Centers from 4.145 up to 4.180″ Bore • CNC Square Deck 45° from Crank and Cam Bar to 10.230″ • Honed to Final 4.150 to 4.185″ Max Bore • Hot Washed • Cam Bearings • Brass Freeze Plugs • Rotator Listed Below
Pontiac Reconditioned 3¾” Magnafluxed Reground Under .010″ or .020″ Max Crank • Pontiac Reconditioned 6.625″ I Beam ARP Rod Bolts and Balanced • Flat Top Cast Aluminum Pistons and Pins • Moly Rings • King or Mahle Bearings • Viton one Piece Rear Main Seal
OPTIONS
Balance Stock Crank to .5 Ounce Inch for Stock Flexplate or Flywheel
+ $ 250.00
ARP Main Stud or Bolt Kit with Align Hone
+ $ 150.00
Full Float Wrist Pin End for Easy On Off Installations with Spiral Lock Pistons
+ $ 175.00
Mahle Forged HP Pistons, Pins and Lightweight Plasma Moly Rings (must balance assembly with aftermarket forged pistons, pins and rings)
+ $ 690.00
H-Beam 4340 Steel Connecting Rods with 7/16″ 12 Point Rod Bolts
+ $ 690.00
Internally Balanced 4340 Steel Crank, 4340 H Beam Connecting Rods w/ARP8740 Bolts, Forged Mahle Pistons, Pins and Light Weight Rings
+ $2990.00
Stock Cam and Plate, Lifters and Timing Set Kit Installed
+ $ 400.00
Isky, Erson or Comp Cams High Performance Cam and Plate, Double Roller Timing Set Kit Installed
+ $ 700.00
Isky, Erson or Comp Cams Pro Street Roller Cam, Morel Lifters, Cam Plate 9 Keyway Billet Timing Set
+ $1495.00
Deluxe Short Block Kit
+ $ 995.00
#10635 Lucas 20w50 Break in Required Oil Case of Six Quarts and Napa Black Gold Oil Filter
+ $ 100.00
Cometic MLS-Multi-3-Layered Steel Severe Duty Head Gaskets up to .041″
+ $ 220.00
Oil Filter Housing and Fasteners Kit
+ $ 150.00
SFI Neutral Harmonic Dampener Honed to Fit Crank and TDC Verified
+ $ 270.00
Neutral Balance Flexplate and ARP Fasteners
+ $ 100.00
Steel Billet Neutral Flywheel and ARP Fasteners
+ $ 390.00
PowerMaster HP Gear Reduction Complete Starter Kit
+ $ 220.00