434ci 750Hp Ford Pro Bracket Race Engine
Now 50 Years later, AwesomeEngines® has just kept doing what they are best at with the best 4 axis Centroid CNC machining centers for perfection in all machine work being dead on. Bore centers are perfect, 45° bank angles, radial clearing, finishing off with plate honing to .0002″ top to bottom then assembled with everything listed in this add. Every engine is dyno tested and tuned to make sure when it arrives, all the beef is inside, justified and verified
$19,975.00
9.500″ Deck | 4.155″ Bore | 4.000″ Stroke | 6.200″ Rods | 615Lb -750Hp @ 5400-7200 RPM
Components
- Dart SHP or World IV CNC Race Prepped Splayed Cap Race Block
- ARP 12 Point ½” Head Stud Kit Plate Honed with the Block
- Dart Coated Cam Bearings, Brass Plugs and Block Small Parts Kit
- Molnar 4340 Internally Balanced Steel Crank
- Molnar Power Adder H Beam Rods with ARP 2000 Rod Bolts
- King or Mahle H Main and Rod Bearings
- JE or Wiseco 15:1 Forged 2618 Pro Series 6CC Dome Pistons
- JE HNS .027/.027/2.0mm Power Adder Rings
- Isky, Erson or Comp .775″ Lift Solid Roller Cam Shaft
- Cloyes True Roller Timing Set with Torrington Bearing
- Comp Cams HIPPO Solid Roller Lifters
- ATI Super Damper Specific Honed to Fit Crank Shaft
- AFR #1451 220-58cc 334/255 with 2.100/1.570 8.0 mm Valves
- PAC 8027 Racing 1.550″ Springs and Titanium Retainers
- Cometic or Fel Pro 1134 MLS Head Gaskets
- Manley or Trend .120″ Wall Chrome Moly Push Rods
- Comp Cams Ultra Series Moly Rockers and AFR Stud Girdle
- AwesomeEngines® CNC Engraved Custom Valve Covers
- Melling M83HV Oil Pump and Moroso Pick Up
- Moroso Front or Rear Sump 7 qt. Oil Pan
- Super Victor 4150 CNC Match Ported
- Proform 1050 cfm Race Series Carburetor and Jomar Spacer
- MSD Black Pro Billet Distributor, 8.5mm Wires and NGK Plugs
- AwesomeEngines® Free 48 State Freight
OPTIONS
Oring Block, Receiver Groove Heads and SCE Copper Head Gaskets
+ $ 375.00
Brodix BP HH F302 Head Hunter 15° 100% CNC Ported Heads 413/247 @ .800″, Glidden Victor 2828 Intake, Jesel Rockers for 855HP @7800 RPM
+ $2975.00
Comp Cams Bushed Hippo Roller Lifters
+ $ 975.00
Isky EZ-Roll X Helix Bushed Hippo Solid Roller Lifters
+ $1275.00
Jesel Shaft Rocker System that does not require Stud Girdle
+ $ 975.00
Moroso Complete Vacuum Kit with Pump Installed Relief Valve
+ $1475.00
MSD Crank Trigger Installed
+ $ 375.00
TCI 157/164 10.5-11.5 SFI Neutral House Balanced to Specifications Flexplate and ARP Fasteners
+ $275.00