440ci 880 Hp Pro Magnum SBC Race Engine

440ci 880HP Pro Magnum SBC Race Engine

Most Powerful 440ci SBC Race Engine in the country with the very best internals as well as the Dart block and Dart Heads to match a perfectly selected proven power making assembled Racing Engine

$22,895.00

9.000″ Deck | 4.185″ Bore | 4.000″ Stroke | 6.000″ Rods | 880Hp @ 7800 rpm

Components

  • Dart Iron Eagle Block with Raised .400″Cam
  • Coated Cam Bearings, Brass Freeze Plug Block Kit
  • ARP Specific Fit Head Stud Kit Plate Honed with Block
  • Callies XL Magnum 4340 Internally Balanced Crank
  • Callies Ultra H Beam Connecting Rods with L19 Rod Bolts
  • Clevite or King Race Series Main and Rod Bearings
  • Wiseco 14.5:1 Gas Ported Coated Skirt Light Weight Forged Pistons
  • Total Seal 043-043-3.0″ mm Low Tension Rings
  • Comp Cams 55mm .800″ Steel Billet 7/4 Swap Cam
  • Cloyes True Roller Billet Timing Set w/Torrington Bearing
  • Cloyes EZ Adjust 2 Piece Solid Aluminum  Front Timing Cover
  • Comp Cams .904″ HIPPO (hi-pressure pin oiling) Roller Lifters
  • ATI Super Damper w/Billet TDC Pointer
  • Dart Prepped 12.5° Fully CNC Ported Aluminum Heads
  • Dart 2.200″ Intake and 1.600″ Exhaust. Stainless Steel Valves
  • Manley 221446 Lightweight Springs and Titanium Retainers
  • Fel Pro MLS Severe Duty Head Gaskets
  • Trend 7/16 x .165″ Wall Severe Duty Push Rods
  • Jesel Pro Series Shaft Rocker System Installed
  • AwesomeEngines® CNC Engraved Sheet Metal Covers
  • AwesomeEngines® Moroso 22171 Billet Pump
  • AwesomeEngines® Moroso Aluminum Pro Eliminator Oil Pan
  • Dart Fully Ported Intake Manifold and Blended Moroso Spacer
  • Holley QFT 1050cfm 4500 Series Carburetor, Jomar CNC Spacer
  • MSD Distributor, Crank Trigger, 8.5 mm Wires, NGK Plugs
  • AwesomeEngines® free 48 state freight

OPTIONS

Brodix or Dart Raised Cam Aluminum Block Fully Race Prepped and Special Head Stud Kit
+ $3500.00
Callies Steel Billet 4330N Internally No Drill Balanced Crank and Heavy Metal Included
+ $ 300.00
GRP Super Light Billet Aluminum Connecting Rods and Machining for Clearance
+ $ 300.00
Total Seal Tool Steel Severe Duty Top Rings
+ $ 200.00
Trend Products Tool Steel .220″ Extreme Duty Wrist Pins (will require 2 more slugs of heavy metal)
+ $ 200.00
Moroso Vacuum Pump System, Pump Mounted Relief Valve, Billet Light Weight Mandrel, all Pulleys, Brackets, Hoses, Ends and Tank with Breather
+ $1100.00
NX 200-500Hp System Installed, O-ring Block, Receiver Grove Heads, SCE Copper Head Gaskets, NOS Cam, .200″ Wall Wrist pins, Tool Steel Top Rings
+ $2000.00
NX RNC 750 Hp Complete with Bottle Plate System for a 2nd Stage N2O System
+ $1700.00
Rons Terminator Fuel Injection Installed and Dyno Tuned for another 20+Hp
+ $2000.00

Dyno Tested and Tuned Using 112 Race Fuel • Vacuum Pump • XL Crank • HP Corrected to Sea Level

Free Freight Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar