468ci 937 Hp Magnum SBC Race Engine
468ci 937 Hp Magnum SBC Race Engine; AwesomeEngines® uses the very best internals as well as the Dart or World Products block and Brodix Heads to match a perfectly selected proven complete assembled Racing Engine available Black-Out Version at no extra Charge!
$29,995.00
9.325″ Deck | 4.185″ Bore | 4.250″ Stroke | 6.200″ Rods | 937Hp @ 7800 rpm
Components
- Dart Little M2 or World 50mm RC .390″ Cam and Wide Oil Pan
- Coated Cam Bearings, Brass Plug and Small Parts Block Kit
- ARP Specific Fit Head Stud Kit Plate Honed with Block
- Callies Steel Billet 4340 No Drill Internally Balanced Crank
- Callies Ultra H Beam Connecting Rods with L19 Rod Bolts
- King HN Series Main and Rod Bearings
- JE 15:1 Gas Ported Coated Skirt Lightweight Forged Pistons
- JE HNS Hardened Nitrous Series 043-043-3.0″ mm Low Tension Rings
- Comp Cams Large Core .800″ Steel Billet 7/4 Swap Cam
- Cloyes True Roller Billet Timing Set with Torrington Bearing
- Cloyes EZ Adjust 2 Piece Solid Aluminum Front Timing Cover
- Comp Cams Bushed .904″ HIPPO Roller Lifters
- ATI Super Damper with Billet TDC Pointer
- Brodix 13° 52cc Fully CNC Ported Aluminum 288cc 261cfm Heads
- Brodix 2.180/1.600″ ” Intake Exhaust Stainless Steel Valves
- Manley Double 1.550″ Lightweight-Springs-Titanium Retainers
- Fel Pro MLS Severe Duty Head Gaskets
- Trend 7/16 x .165″ Double Taper-Wall Severe Duty Push Rods
- Jesel 20592 Pro Series Shaft Rocker System
- AwesomeEngines® CNC Engraved Sheet Metal Covers
- AwesomeEngines® Moroso 22171 Billet Pump
- AwesomeEngines® Moroso Aluminum Pro Eliminator Oil Pan
- Brodix 1300 4150 1301 4500 Match Ported Intake Manifold
- Holley QFT 1050cfm Either Series Carburetor, Jomar CNC Spacer
- MSD Distributor, Crank Trigger, 8.5 mm Wires, NGK Plugs
- AwesomeEngines® Free 48 State Freight
OPTIONS
Brodix Hipped Raised Cam Aluminum Block Fully Race Prepped and Special Head Stud Kit
+ $5000.00
Isky Red Zone Professional Series Bushed Roller Lifters (one of the best we have seen with our engines)
+ $ 400.00
Trend Products Tool Steel .220″ Extreme Duty Wrist Pins (will require 2 larger slugs of heavy metal)
+ $ 300.00
Moroso Vacuum Pump System, Pump Mounted Relief Valve, Billet Light Weight Mandrel, all Pulleys, Brackets, Hoses, Ends and Tank with Breather
+ $1500.00
NX 200-500Hp System Installed, O-ring Block, Receiver Grove Heads, SCE Copper Head Gaskets, NOS Cam, .220″ Wall Wrist pins C23 NOS Required
+ $2000.00
Rons Terminator Fuel Injection Installed and Dyno Tuned
+ $2000.00