510ci 1550 Hp 4.5″ SBC SBX Nitrous Race Engine

510ci 1550 Hp 4.5″ SBC SBX Nitrous Race Engine


4.5″ BS | 9.625″ Deck | 4.25″ Bore | 4.5″ Stroke | 6.25″ Rods | 1550HP @ 7000 RPM w/500HP NOS


  • Brodix 8B1200C Raised Cam Block 100% CNC Race Prepped
  • O-Ring Block, Stainless Steel Wire if Copper Head Gaskets Used
  • ARP Pro Series Head Stud Kit Plate Honed with Block
  • Callies 4340 Steel Billet Internally Balanced No Drill Crank
  • Callies Ultra I Beam Rods with L19 Rod Bolts
  • Clevite or King Race Coated Main and Rod Bearings
  • JE or Wiseco Gas Ported Anodized Coated Nitrous Pistons
  • Precision or Trend .240″ Wall Tool Steel Wrist Pins
  • Total Seal Tool Steel Top 9/9/3.0 mm Rings
  • Competition Cams 7/4 Swap Steel Billet N2O Roller 50 MM Cam
  • Isky Extreme Zone EZ-Roll™ Helix Roller Lifters
  • Jesel Belt Drive and Front Mounted Distributor
  • ATI Impregnated Crank Trigger Super Damper Specific Honed
  • SBX Symmetrical 11° Billet Fully CNC Ported Heads Softened Chamber
  • Titanium Intake and Exhaust Valves
  • Pac Racing Springs and Titanium Retainers
  • MLS or Receiver Groove Heads for SCE Copper Head Gaskets
  • Trend Taper Wall 1/2″ Exhaust and 7/16″ Intake Push Rods
  • Jesel Pro Series Shaft Rocker System
  • Awesome Engines® CNC Engraved Logo Valve Covers
  • Moroso External Billet Oil Pump and 4 Vane Vacuum Pump Kit
  • Moroso Aluminum Pro Eliminator Oil Pan
  • CFE Sheet Metal 1×4 Intake and Spacer Kit
  • NX RNC 750Hp Plate System
  • Holley Ultra or QFT FX Nitrous Carburetor and Spacer
  • AwesomeEngines® Free 48 State Freight


510ci CFE Billet CNC Machined 4.5″ Race Block with .937″ Key-Way Bushed Lifters 60 MM 1.0″ Raised Cam and Jesel Belt Drive
Bill Miller or GRP Billet Aluminum Connecting Rods (must have CFE billet raised cam block only)
+ $495.00
Moroso 5 Stage Dry Sump System Installed Completely (no need for an air pump)
+ $2475.00
80019-10 8 Cylinder VXL DIRECT PORT, 4 SOLENOIDS, (200-500HP JETTING)
+ $1475.00
Ron’s Terminator or Twin 2×4 Methanol Injection Set up for NOS
+ $2475.00
10″ Six Lug Dual Anti Ballooning Plate, Steel Stator Nitrous Torque Converter for this Engine Your Car, Tire, Weight, Gear Application
+ $1595.00
#5000-2000 Hp PowerGlide One of the Most Used in the Industry
+ $4900.00
#5500-3000 Hp PowerGlide One of the Best in the Industry
+ $5400.00
SFI 168 Tooth Flexplate and Power Master Starter Kit
+ $ 350.00

Dyno Tested and Tuned • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or the Nearest Terminal for your Zip Code For Pickup in the 48 States

Comments are closed.

Skip to toolbar