553ci 920 Hp Pontiac Pro Bracket Race Engine

553ci 920 Hp Pontiac Pro Bracket Race Engine

Now Bigger and Updated with a 4.650″ Stroke Molnar Crank and Power Adder Rods so Nitrous or ProCharger is not a Problem and to Make one of the Best Pontiac Engines Available: MR1 Block • 430 CFM CNC Ported Heads • Naturally Aspirated or Power Adder Engine

$22,975.00

10.230″ Deck | 4.350″ Bore | 4.650″ Stroke | 6.700″ Rods | 920 Hp @7000 rpm

3Components

  • MR1 Splayed Cap 100% Fully Race Prepped Block
  • Coated Cam Bearings and Block Small Parts Kit
  • ARP Head Stud Kit Plate Hone with Block
  • Molnar 4340 Internally Balanced Steel Crank
  • Molnar Power Adder 4340 H Beam Rods with ARP 2000 Bolts
  • Clevite or King Race Series Main and Rod Bearings
  • JE or Wiseco Forged Pistons 14.63:1 Compression and .180″ Wall Pins
  • Total Seal SS, TNT or Hell Fire 043 043 3.0 mm Rings
  • Competition Cams 55mm Steel Billet Roller Cam
  • Competition Cams .903″ Bushed HIPPO Roller Lifters
  • Cloyes Billet True Roller Timing Set
  • New Aluminum Front Cover Kit
  • ATI Super Dampener Specific Honed to Crank
  • KRE 64cc Aluminum High Port CNC Ported 430 cfm Heads
  • Ferrea 2.200/1.700″ 1200 Series Stainless Valves
  • PAC Racing Springs and Titanium Retainers
  • Cometic Multi-Layer Head Gaskets
  • Manley 3/8″ x .135″ Wall Push Rods
  • Jesel or T&D Shaft Rocker System
  • AwesomeEngines® CNC Logo Engraved Sheet Metal Valve Covers
  • Melling M54F 80lb Pressure Oil Pump and Proper Pickup
  • Moroso Drag Race 8 Qt. Oil Pan
  • Victor 2957 Match Ported Intake and Jomar Spacer
  • Holley or QFT 1150 CFM Carburetor
  • MSD Distributor, 8.5mm Wires, NGK Racing Plugs
  • AwesomeEngines® Free Freight to 48 States

OPTIONS

MR1A Aluminum Race Block, Bronze Lifter Bore and Special Head Stud Kit
+ $2570.00
578ci 950Hp Callies or Crower Steel Billet 4330 4.750 Stroke and Externally Driven Moroso Single Stage Oil Pump and Special Pick Up and Oil Pan
+ $2970.00
Isky EZ Roll Read Zone Bushed Rem Finish Roller Lifters
+ $890.00
Callies Ultra I Beam Steel Rods with ARP L19 Rod Bolts
+ $ 970.00
Moroso Complete 3 Vain Vacuum Pump System Dyno Tested with Engine
+ $1270.00
MSD Crank Trigger Dyno Tested and Tuned with Engine
+ $ 290.00
SFI Approved Flexplate, ARP Bolt Kit and Powermaster HP Stater Kit
+ $350.00

Dyno Tested & Tuned with 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar