565ci 1000Hp BBC Race Engine Special
I personally run this in my Pro Start Top Dragster with 3.50 Gear, 14 x 32 MT, 9″ 5000 rpm Converter, PG 1.80 Gear, Borla mufflers, Wing, 1.08 60ft Et was 7.36 @ 186 mph. Take the wing off and it would of run high 20s
$13,975.00
10.195″ Deck | 4.350″ Bore | 4.750″ Stroke | 6.700 Rods | 1000 Hp @ 7400 rpm
Components
- GM 4 Bolt Main 100% CNC 4 Axis Race Prepped TD ¾ Filled Block
- 12 Point Head Stud Kit Plate Honed with Block
- Molnar SD 4340 Internally Balanced Steel Crank
- 6.700 4340 H-Beam Rods with ARP 2000 Rod Bolts
- King H Series Bearings
- Wiseco 14:1 Compression Pro Series 2618 Forged Pistons
- Wiseco Tool Steel .180″ Wall Wrist Pins
- JE 1/16-1/16-3/16 HNS Rings Specific File to Fit
- AwesomeEngines® 7/4 Swap Custom.775″ Steel Billet Roller Cam
- COMP Cams Bushed Hippo Solid Roller Lifters
- Rollmaster Billet Timing Set with Torrington Bearing
- GM Timing Cover Kit and TDC Verified Pointer
- ATI Super Dampener and SFI Flexplate
- 360cc 119cc House Prepared Aluminum Square Port Heads
- Manley 2.300 x 1.880″ Stainless Steel Valves
- Manley Double Roller Springs and Titanium Retainer Kit
- Manley 7/16-165 Wall Intake and Exhaust Push Rods
- Fel Pro 1075-.041″MLS Severe Duty Head Gaskets
- COMP Cams Ultra Magnum 1.7 Rockers
- Jomar Ultra-Light Stud Girdle with .600″ Adjusters
- AwesomeEngines® Black Laser Engraved Valve Covers
- Moroso#22175 Oil Pump Kit
- Moroso #21047 Drag Race Oil Pan
- Pro-Filer 100% CNC Match Ported Intake Manifold
- Ron’s Complete Terminator Injection System with Pump Kit
- MSD Locked Distributor, Crank Trigger, 8.5 mm Wires, NGK Plugs
- AwesomeEngines® Free 48 State Freight
Options
Jesel Shaft Rocker System
+ $1675.00
Moroso Vacuum Pump, Mandrel, Lines, Fittings, Breather Tank, Brackets, Relief Valve Kit Dyno Tested with Engine
+ $1475.00
9″ Steel Stator MD Specific Built for Application with One Year Warranty
+ $1975.00