575ci 1000 Hp BBC Drag Race Engine Special

575ci 1000Hp BBC Drag Race Engine Special

I personally run one of these engines 8 years ago in my Pro Start Dragster with a 3.50 Gear, 14 x 32 MT Slick, 9″ 5800 rpm Converter with a PG 1.80 Gear Set Transmission. It went 7.38 @ 186 mph with mufflers, big Wing, had a 1.06 60ft. Take the wing off and it would of run high 20s. I now have another one of these engines coming up. I personally CNC race prepped the block, plate hone it, assemble and Dyno Tune it. If your looking for an engine that will make 1000hp, this is it. Will have ready 1st of the year or sooner, do not wait.

$14,995.00

10.200 Deck | 4.390″ Bore | 4.750″ Stroke | 6.700 Rods | 1000 Hp @ 7200 rpm

Components

  • GM 4 Bolt Main 100% CNC 4 Axis Race Prepped TD Block
  • Durabond Cam Bearings and Brass Freeze Plug Kit
  • 12 Point Head Stud Kit Plate Honed with Block
  • Molnar SD 4340 Internally Balanced Steel Crank
  • K1 Steel Billet 4340 H-Beam Rods with ARP 2000 Rod Bolts
  • King H Series Race Bearings
  • JE or Wiseco 15:1 Compression Pro Series 2618 Forged Pistons
  • JE or Wiseco Tool Steel .180″ Wall Wrist Pins
  • JE 1/16-1/16-3/16 Hell Fire Rings Specific File to Fit
  • Cam Motion Custom Steel Billet Solid Roller Cam
  • Comp Cams Severe Duty Bushed Hippo Solid Roller Lifters
  • Rollmaster Billet Timing Set with Torrington Bearing
  • GM Chrome Timing Cover Kit and TDC Verified Pointer
  • ATI Super Dampener and TCI SFI Required Flexplate
  • 100% Race Prepped Bowl Area 360cc New Aluminum Heads
  • Manley 2.300 x 1.880″ Stainless Steel Valves
  • Manley or Pac Triple Roller Springs and Titanium Retainer Kit
  • Manley 7/16-165 Wall Intake, ½-.200 Wall Exhaust Push Rods
  • Fel Pro 1075-.041″MLS Severe Duty Head Gaskets
  • Comp Cams Ultra Magnum 1.7 Rockers
  • Jomar Ultra Light Stud Girdle
  • AwesomeEngines® CNC Engraved Polished Aluminum Covers
  • Moroso#22175 Oil Pump Kit
  • Moroso #21047 Drag Race Oil Pan
  • Pro-Filer 100% CNC Match Ported Intake Manifold
  • Ron’s Complete Terminator Injection System with ½ Pump Kit
  • MSD Billet Distributor,  Crank Trigger, 8.5 mm Wires, NGK Plugs
  • AwesomeEngines® Free 48 State Freight

Options

Jesel Shaft Rocker System is Recommended with this Engine for Perfection and just the Know of
+ $1275.00
ATI Super Dampener Aluminum Lightweight Shell
+ $ 125.00
Moroso Vacuum Pump, Mandrel, Lines, Fittings, Breather Tank, Brackets, Relief Valve Kit Dyno Tested with Engine
+ $1075.00
TSI 9″ Steel Stator MD Specific Built for Application with One Year Warranty
+ $1575.00

Dyno Tested and Tuned • Methanol • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar