598ci BBC SD M&M Complete Pro Bracket Short Block
$13,695.00
AwesomeEngines® 4-Axis 100% CNC Race Prepped 9.800″ Dart Big M or World IV Splayed Main Cap Block • CNC Blue Print Bored 4.840″ Bore Centers • CNC Zero PTH Square Decked 90° to 9.800″ • CNC Blue Print Radial Clear for 4.500″ Stroke • Plate Honed to a Final 4.600″ Bore with Head Studs • Cam Bearings • Block Small Parts Kit • Hot Washed, Professionally Assembled for any Application Being Used with the Rotator Listed
Assembled with Listed Rotator, Camshaft Kit, and Deluxe Short Block for a 598ci M&M Pro Bracket Complete Short Block Assembled by One of the Best Engine Builders in the Country. Your Heads, Induction, Ignition and be Racing in One Day with an Engine Capable of 1400+HP. Just Read what is included with this M&M Complete Short Block by just installing Your Parts you already Have
Manley or Molnar 4340 8 Counter Weight Crank • Manley or Molnar 6.535″ H-Beam Rods, Asymmetrical ARP 2000 Rod Bolts • JE or Wiseco Custom Quick 8 or 16 Pro Series up to 15:1 Pistons • JE 043/043/3.0mm AP Steel Power Adder Rings with Tool Steel 1400 Hp Wrist Pins • Clevite or King Race Series Bearings
OPTIONS
Dart Big M or World IV Steel Billet Splayed Cap Block
+ $ 475.00
Brodix or Dart Hipped Aluminum Light Weight Race Block, ARP Specific Fit Head Stud Kit With No Loss of Power
+ $4475.00
Callies Magnum Series Crankshaft and Internal Heaving Metal Balancing Included
+ $1875.00
.904″ Lifter Bores
+ $ 275.00
Severe Duty I-Beam 4340 Rods with L19 Bolts Good For 2000+Hp
+ $ 275.00
JE AP Steel Rings and Tool Steel Thick Wall Wrist Pins and Heavy Metal
+ INCLUDED
JE or Wiseco Tool Steel .220″ Thick Wall Wrist Pins and Needed Heavy Metal
+ $ 275.00
Cam Shaft Kit; Bullet, Comp Cams or Erson Steel Billet 7/4 Swap Cam, Rollmaster IWIS Chain Billet Timing Kit
+INCLUDED
Competition Cams or Erson Bushed Severe Duty Hippo Solid Roller Lifters
+ INCLUDED
Isky Red Zone EZMAX Red Zone Bushed Ultra Duty Hippo roller Lifters
+ $475.00
Jesel Belt Drive System
+ $995.00
TCI SFI Approved Internally Balanced Verified Flexplate with ARP Bolt Kit
+ $ 225.00
Deluxe Short Block Kit; Pro Eliminator Oil Pan, SFI Approved ATI Super Dampener, Wix Race Filter, 7 Quarts of 10635 Lucas Break in Oil, Oil Pump Primed
+ INCLUDED
Cometic or Fel Pro MLS Power Adder Head Gasket up to .051″ Thick
+ $245.00
ARP Head Stud Kit Plate Honed already in the Block so you Can Install the Induction System for EZ GO Racing
+ $ 275.00