598ci 1050Hp BBC Marine Monster Race Engine
598ci Marine Monster Race Engines are built specifically for severe duty applications when 93° unleaded pump gasoline is used for higher rpm and power levels are required. For these power levels and endurance, only the best USA manufactured parts are used including the Dart Big M Sportsman, GM Bowtie or World IV 9.800 severe duty block using the best steel billet splayed main caps, 55mm cam bearings, .904″ lifter bores are finished machining on our state of art Centroid 4-axis CNC machining center to blue print perfect dimensions. Each engine is meticulously assembled then dyno tested and tuned for maximum power and longevity. These are the best reliable Marine 93° Pump Gas Engines available 100% made and built in the USA today.
$30,475.00
9.800″ Deck | 4.600″ Bore | 4.500″ Stroke | 6.535″ Rods | 1050Hp/904lbs @ 7500/5800rpm
Components
- Dart Big M, GM Bowtie or World IV Race Block
- ARP 12 Point Head-Inner Valley Stud Kit Plate Honed with Block
- Stainless Steel Coolant, Galley Plugs, Dowel Pins and Cam Plate Kit
- Callies USA Made 4340 Magnum Plus Pro Series Crank
- Callies Ultra H-Beam 4330M Timken Steel Rods ARP H-11 Bolts
- King Race Series Main and Rod Bearing Set
- JE Custom 10:1 Forged 2618 Pistons
- JE Tool Steel Severe Duty .220″ Wall Wrist Pins
- JE 1.5/1.5/3.0 mm Hardened Nitrous Series Lightweight Rings
- Comp Cams or Erson Steel Billet 7/4 Marine Roller Cam
- Isky Red Zone EZX .904″ Bushed Roller Lifters
- Cloyes Billet True Roller with Torrington Bearing
- Cloyes 2 Piece Timing Cover with TDC Billet Timing Pointer
- ATI Super Dampener Specific Honed to Fit Crank Shaft
- Brodix SSR20° CNC Ported Cylinder Heads
- Brodix 2.400 Intake and 1.800″ Exhaust Valves
- Manley or Pac Lightweight Springs and Titanium Retainers
- Cometic or Fel Pro Marine MLS Head Gaskets
- Manton or Trend 7/16 x. 165″ Wall SD Push Rods
- Jesel Pro Series 1.75 Rockers
- AwesomeEngines® CNC Engraved Sheet Metal Covers
- Moroso #22167 Billet Gerotor Oil Pump
- AwesomeEngines® Marine 12qt Oil Pan
- Brodix SR20° CNC Match Ported Intake Manifold
- Holley or QFT 1450 cfm Professional Series Marine Carburetor
- Phenolic Heat Sink Spacer
- MSD Billet Distributor, 8.5mm Wires, NGK Plugs
- AwesomeEngines® Free 48 State Freight
OPTIONS
Brodix Hipped Light Weight Racing Block Fully CNC Race Prepped with Longer Specific Head Stud Kit Included
+ $5200.00
Callies Ultra Series I Beam Rods with L19 Rod Bolts
+ $4000.00
Titanium Valves and Copper Beryllium Valve Seats
+ $1200.00
Marine Oil Cooler System with Billet Oil Filter Adapter, #10 Lines and all AN Fittings
+ $1000.00
MSD Marine Complete Marine Ignition System Including Box, Coil all Dyno Tested and Tuned For Complete Drop In Engine Kit
+ $1000.00
Moroso Custom Marine Vacuum Pump Kit Dyno Tested with Engine
+ $1300.00
AwesomeEngines® Custom Evacuation Dual Valve Cover Stainless Steel AN Fitting System Installed with New Larger Breather
+ $ 700.00