461ci 735HP NA 1035hp BBC 300HP NOS Engine Special
461ci 735Hp-NA NOS 1035 BBC Engine Special: CNC Machined GM 4 Bolt Main 4.280″ Fresh Block • 4340IB Steel Crank • GM Dimple 7/16″ Rods • Completely Balanced • Blueprinted • Assembled • Dyno Tested and Tuned • engine in my 2350lb door car produces consistent 7.65 ets @ 180mph, my ProStart 2150lb Dragster with 110 Fuel and Can Be Driven in a street car with 93 octane pump gas or take it to the track with correct tire, gear, convertor, fuel and tune up it will go fast enough
$9,755.00
9.780″ Deck | 4.280″ Bore | 3.76″ Stroke | 6.135″ Rods | 735Hp @ 7200 rpm
Components
- GM 4 Bolt Main Block 4 Axis CNC Machined Block
- ARP 12 Point Head Stud Kit Plate Honed with Block
- 4340IB 4.000″ Internally Balanced Steel Crank
- GM 6.135″ I Beam Full Floated Dimple 7/16 Rods
- King H Series Coated Bearings
- JE or Wiseco 11:1 Dome Forged Pistons
- JE HNS Power Adder Rings and .200″ Wall Wrist Pins
- Comp Cams NOS Solid Roller Cam Shaft
- Comp Cams Hippo Solid Roller Lifters
- Rollmaster Torrington Double Roller Timing Set
- GM Timing Cover and TDC Verified Pointer
- Int/Bal SFI Harmonic Damper
- Aluminum Oval Large Port Heads Machined in House
- Stainless Steel 11/32 Light Weight SD 2.25 Int 1.88 Exh Valves
- Manley 1.640″ Springs, Titanium 10° Retainers and Super Locks
- Cometic or Fel Pro MLS Triple Layer Head Gaskets
- Jesel 1.8″ Sportsman Shaft Rocker System
- CNC Engraved Blackout Valve Covers
- M77 High Pressure Oil Pump with Welded Pickup Tube
- Moroso 20401 Seven-Quart Oil Pan and Dipstick
- Edelbrock Victor 4150 Intake Manifold and Spacer
- Proform 950CFM Double Pumper Carburetor
- NOS 02101 3 Hp Levels from 100 to 300Hp New Kit
- MSD Blackout Distributor 8.5mm Wires and NGK Spark Plugs
OPTIONS
Jesel Pro Series Shaft Rockers with 1.8 Ratio
+ $ 600.00
ATI SFI Super Dampener Honing Labor
+ $ 300.00
SFI Flexplate and ARP Fasteners Internally Balanced in House
+ $ 600.00