409ci 600 Hp SBC Engine Special
409ci 600 Hp Engine Special with 4340 Internally Balanced Rotator with 11:1 New Mahle Forged Flat Top Pistons, Plasma Moly Rings, HP Series Bearings, MLS Fel Pro Head Gaskets, 12 Point Head Stud Kit and Brass Plug Kit. Block, Dart 215cc Heads, 4150 Victor Intake, 850 DP Carburetor, MSD Distributor, Valve Covers are Freshened Items are clearly listed not new. Dyno Tested and Tuned on 93 Octane Exxon Pump Gas easy to use for a Pro Street Driver
$7975.00
9.010″ Deck | 4.165″ Bore | 3.75″ Stroke | 5.700″ Rods | 600Hp @ 6400 rpm
- 434040037557002100 Fresh Internally Balanced Crank Shaft
- 434057002100927B H Beam Fresh Steel Rod with 7/16 ARP Bolts
- New Mahle 11:1 Forged Flat Top Pistons and Pins
- New Mahle Light Weight Plasma Moly File to Fit Rings
- New Durabond Cam, King Main, and Rod HP Series Bearings
- Perfect Rollmaster Timing Set with Torrington Bearing
- New Fel Pro MLS SD Head Gaskets
- New Chrome Moly .120″ Wall Push Rods
- New 12 Point Head Stud Kit Plate Honed with the Block
- Internally Balanced SFI Damper and Billet TDC Pointer
- New NGK Plugs, Napa Gold Filter, Lucas Break in Oil
- Fresh GM 4.165 4-Bolt Studded Main Cap 4 Axis CNC Machined Block
- Melling 60lb HP Pump, Pick-up, Stud, HD Shaft 7 Qt. Oiling Kit
- Dart Fresh 215cc Aluminum Cylinder Heads 2.05/1.60 SS Valves
- Double 1.440″ Hydraulic Roller Valve Springs 10° Retainers and Locks
- Comp Cams Hydraulic Aggressive Roller Camshaft
- New Comp Cams, Lunati, or Morel Hydraulic Roller Lifters
- New Chrome Moly Super Series 1.5 Ratio 7/16 Rockers
- Stud Girdle Kit
- Dyno Tuned Billet Distributor, 8.5 mm Wires; will require 6AL Box
- Fresh Holley 4781-850 cfm Double Pumper Carburetor By Bill
OPTIONS
Jesel or T&D Shaft Rocker System; needing no valve adjustment or stud girdle protection
+ $1295.00
TCI SFI Internally Balanced Flexplate and ARP Fasteners
+ $ 150.00
Power Master HP Starter Shimmed Correctly and Installed with Bolt kit
+ $ 225.00