Pontiac 475ci Pro Street Crate Engine
400-3.000″ Main 100% CNC Race Prepped Block,4.155″ final bore which required for a perfect clean final bore, cnc square decked, Internally Balanced 4.375″ 4340 Steel Crank, 6.800 H Beam Rods with ARP2000 Rod Bolts, Mahle forged flat pop pistons. Pontiac race prepared steel heads with new moving components, valves, springs, retainers, locks, seals, valve guides and exhaust seats if required; Assembled, Dyno Tested and Tuned for pump gas
$14,495.00
10.222″ Deck | 4.155″ Bore | 4.375″ Stroke | 6.800″ Rods | 675lb 4400 – 695Hp @6200
Components
- Pontiac 400ci 100% 4 Axis CNC Machined 4.185″ Bore Block
- ARP Head Bolt and Main Stud Kit
- Brass Freeze Plug Complete Block Kit
- Eagle or Scat 4.375″ Internally Balanced 4340 Steel Crank
- Eagle 6.800″ H Beam 4340 Steel Rods and ARP2000-7/16 Rod Bolts
- King or Mahle H Series Main and Rod Bearings
- Mahle 10.75:1 Forged Flat Top Pistons
- Mahle File to Fit Plasma Moly Rings
- Comp, Erson or Isky Hydraulic Roller Cam
- Comp, Erson or Morel Hydraulic Roller Lifters
- Double Roller Timing Chain and Gear Kit
- New Aluminum 9 Bolt Front Timing Cover Kit
- New Internally Balanced Damper
- Kauffman 310cc 85cc Aluminum D Port Exhaust Heads
- Ferrea Stainless Steel Valves
- 1.437 Springs and 10° Tool Steel Light Weight Retainers
- Cometic MLS Head Gaskets and Viton 2 Piece Rear Main Seal
- LPC or Manley.120″ Thick Wall Chrome Moly Push Rods
- Comp Cams #1451-16 Roller Tip Rocker Arms
- Melling M54DS HP Oil Pump and Proper Pickup Tube
- Moroso Stroker 7qt. Race Oil Pan with Baffling
- Short or Tall Chrome Valve Covers
- Edelbrock Torker II Intake Manifold
- 950cfm Proform Double Pumper Carburetor Dyno Tuned
- Ready to Run MSD, 8.5 mm Wires and Autolite Race Plugs
- Free Shipping Charges to Your Zip Code for Pick Up
OPTIONS
MR1 4 Bolt Steel Billet Splayed Cap 3.000″ Main Block with Bore Size 4.120″ to 4.4″ and Stroke up to 4.75 for the Pontic Monster Motor 578ci
+ $3500.00
AwesomeEngines® 100% 4 Axis CNC Race Prepped MR1A Aluminum Light Weight Race Block
+ $4500.00
565ci Monster Pontiac Engine and No One can Tell what it is because it Looks Exactly the Same; MR1 HP Block Max 4¾” Stroke CNC Bored to 4.350″
+ $6995.00
Harland Sharp Roller Aluminum Rockers and Tall Black Valve Covers
+ $ 300.00
Jesel or T&D Shaft Rocker System Installed
+ $1300.00
Kauffman or Edelbrock Performer D Port 340 cfm 100% CNC Ported Aluminum Heads
+ $2495.00
Kauffman High Port Oval Port Exhaust CNC Ported Aluminum Heads
+ $3495.00
Kauffman North Wind Match Ported Intake Manifold and Crossover
+ $ 750.00
SFI High Performance Specific Honed to Crankshaft Snout Internal Balancer
+ $ 200.00